New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

An urn for Shadowdog - PICs

Posts

An urn for Shadowdog - PICs

#1

An urn for Shadowdog - PICs

Dave Smith, Longview, WA

>A couple of years ago I was asked to make an urn for a dog named Gizmo. After the first of the year I was asked to make an urn for Gizmo’s friend Shadowdog. I was hesitant to make the first urn because my turning skills were not very advanced at that time. This time I turned a larger urn from green American elm and after the rough out dried I finished it this week..



Heartwood side. Urn is 12", 5" 3/4" wide and the base is 4".



Early wood side. Both sides look great. Wood is a little lighter than the picture shows.



Top close up. The grain is parallel to the sides so the lid matches perfectly.



Opening is 2 7/8" and tapers down to 2 1/2"



Lid has a tapered tenon which fits close. A few drops of glue will hold the lid in place.

The urn is finished on the outside with 3 coats of Rockler’s gel polyurethane. Sanded to 320 before first cost and 600 between coats. Inside is not finished.

Comments welcome.

Dave Smith

I can turn most anything no matter how long it takes in Longview, WA.

Re: An urn for Shadowdog - PICs

#2

Re: An urn for Shadowdog - PICs

Bill Crommett

>Dave: I turned a couple of urns for a freinds' dog, but he decided he would keep one for himself and I could turn another for the dog. These were turned out of black cherry and were quite interesting with the lighter sap wood seemed to be dripping down over the darker, slightly narrower heartwood That Elm is a beautiful piece of work (art/craft or whatever seems PC to you)

Re: An urn for Shadowdog - PICs

#3

Re: An urn for Shadowdog - PICs

Jennifer@Indy.USA

>Dave, this looks really nice. What a nice thing to make for someone who has lost thier family pet. I love the tennon and how it fits into the urn.

Jen

Re: An urn for Shadowdog - PICs

#4

The customer was very pleased.

Dave Smith, Longview, WA

>Hi Jennifer,

Jonathan was very pleased with the urn. Compared to the first one I turned it is a masterpiece. He thanked me profusely for turning the urns for him. Makes me feel good that my work is appreciated by a returning customer. Just wish it was for an other reason.

See yo in KC.

Dave Smith

Packing for the KC trip in Longview, WA.