New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Finish question

Posts

Finish question

#1

Finish question

Carole in VA

>I have a piece that I have buffed with tripoli and white diamond, but I have decided that I would like it better with lacquer. Will the carrier in the buffing compounds prevent the lacquer from adhering? I suspect it is a waxy type of substance.

Re: Finish question

#2

Re: Finish question

Carles

>With a cloth soaked in turpetine you can eliminate all remains of wax in your piece. I always use it before apply lacquer and other "coat" finishes.

Un saludo,

Carles.

Re: Finish question

#3

Re: Finish question

W.C. Turner

>The buffing compounds actually have an animal fat base.

Re: Finish question

#4

Re: Finish question

Carles

>Turpetine oil can remove all kinds of fat (mineral wax, beeswax or animal fat). You can use organic dissolvent but is a very toxic substance and I don't like it.

Carles.

Re: Finish question

#5

Re: Finish question

Russ Fairfield

>A vigorous scrubbing with a natural bristle scrub brush after each buffing compound will remove the excess trash. Use it after the wax buff and it will remove the excess and the shine will be the better for doing it.

Do not use a brush with nylon bristles because the ends are sharp and they will scratch the surface.


img

Re: Finish question

#6

Thanks, Russ

Carole in VA

>When buffing, I had just been wiping with a rag between compounds. I will try the brush.