New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Pondering

Posts

Pondering

#1

Pondering

Don Henthorn

>Well, after about seventy years of self learned turning, I got Bill’s DVD on turning a

bowl. Hey! some things I was doing right! I had never really learned a shearing cut, and

that did make a difference. Using scrapers was not new and I still find that for many

tasks I prefer a sharp 1/2” scraper to gouges. As I have stated many times I have always

used glue blocks for most face plate type turning. After watching the video I can see that

there could be few cases when a scroll chuck might be preferable.

I have been thinking about the $90.00 Grizzly chuck although I don’t like the idea of

having a chuck that is so limited in the size of things it will grab. I certainly would not

spend a couple of hundred dollars on so limited a chuck. Still looking. A three jaw

chuck is attractive mainly because it has a much better range of sizes. Sold my old one

with my Blount lathe, but it was a really heavy dude. I do miss it at times.

I have had a few old customers call to see if would still cane chairs for them and that is

giving me a little discretionary money to spend. Don’t want to buy very much because at

85 I don’t expect to use it for a long time. Would like to have a medium size chain saw

since I have discovered what the city does with the trees it takes down. It aint pretty.

Lots of elm biting the dust lately.

Thanks for listening.

Re: Pondering

#2

Re: Pondering

Carole in VA

>Hey, Don, if you get out and use that chain saw it will probably keep you healthy for another 15 or 20 years! ;) Someone here did a review of the Griz chuck a while back, but I don't remember who it was. I have the Nova Midi (the new one) and it's OK. They are limited in the size they can hold though like any smaller chuck. My Nova jaws require a dovetail tenon, which for some reason, I feel holds better than a straight tenon. I don't mess with glue blocks now unless I have to. I turn between centers, turn the tenon and chuck mount most of my stuff. Just a beginners two cents worth!

Re: Pondering

#3

Re: Pondering

Mike Rubes, Apex, NC

>Hi Don,

I cannot help you with the chuck, but just wanted to say that you are an inspiration to us young guys. I see guys like you and Wally well into your 80's still working away and making great stuff and it just really impresses me. I hope that if and when I reach your age, I still have the drive to learn new stuff and continue making things.

I enjoy your posts and look forward to the pictures of stuff you have made. Here's hoping that in 2053 when I turn 85 part of my celebration is some time in the shop!

All the best,

Mike

Re: Pondering

#4

Re: Pondering *LINK*

Fred Holder

>I haven't used a faceplate with glue block mounting since about 1990 when I purchased my first Nova Chuck. I liked it so well that I bought a second one with a different set of jaws about a year later. I think we have twelve or thirteen Nova chuck of the different configuarations and most of the Nova chuck jaws, except the Cole Jaws. I had a set of them but didn't care much for them. I prefer the final reversal into a jam fit chuck or onto a vacuum chuck. I use the chucks for all types of turning and heavily for bowl turning. Mount the blank between centers and turn the outside of the bowl including a tenon to fit the chuck then reverse it into the chuck for hollowing and finishing. Finally, I reverse mount the bowl for a third time to final turn the foot of the bowl to remove any sign of how it was held on the lathe.

If you are going to get a chuck, I highly recommend you get a good one to start with. The Grizzly chuck will probably make you feel like you've been right all of these years in not buying a chuck. A good Nova chuck will make all of the difference in the world. I have Nova chucks because I started out buying them when no one else was making woodturning chucks. I've been satisfied and just keep using them. However, the Oneway Chucks, the Vicmarc Chucks, etc. are all good chucks, but I believe most of them cost more than the Nova chucks of the same capability.

Don't write yourself off too soon. I believe that keeping busy is the way to live longer. At 50, I didn't think I would make it to 65 and definitely not to 74, but today I expect to live another 30 years and cross the one hundred mark. Keep busy and challenged and you will likely make it too.


Fred Holder's Domain Site