New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Retirement Present To Myself

Posts

Retirement Present To Myself

#1

Retirement Present To Myself

Dick Parr

>Since I retired last Friday I thought I would go ahead a get myself a little something to spend my free time with. This is replacing a 1946 Delta/Rockwell 12" x 36" lathe that I added a 3/4 hp motor to. It was nice but only one speed.

I think I will like this much better.

Thanks for looking

Dick in Knoxville


img

Re: Retirement Present To Myself

#2

Re: Retirement Present To Myself

Wade Mackey

>Congrats, I have the older one. I'm sure your going to enjoy it.

Wade Mackey

Lancaster, PA

Re: Retirement Present To Myself

#3

What a bad choice......

Michael Stadulis, in Gloucester County, NJ

>.....you'll hate that lathe Dick. Trust me, you will not like a thging about it. Send it over to me so you won't waste your retirement on that thing... ;o)

Happy retirement .....and enjoy yourself with the new lathe. It's a beaut,

Mike

Re: Retirement Present To Myself

#4

Re: Retirement Present To Myself

Jorge Castaneda ~ Downeast Maine

>Congratulations Dick, welcome to the club.

I have the 300, I see you got the variable speed and the outrigger tool rest, let us know how you like that outrigger.

Have fun

Jorge

Re: Retirement Present To Myself

#5

Re: Retirement Present To Myself

Bob Tabor

>Congratulations. I have had my Nova DVR for about a year now and I realy enjoy it. Have fun.

Re: Retirement Present To Myself

#6

Re: Retirement Present To Myself

Barry Irby

>I have one about two years old. I really like mine. Mine starts at 250 RPM, hard to think of what I would do with 100. Let me know what you think of the outboard rest. I actually put a blank on mine with the head tilted to he side and turned it round with the lathe running backward, because I did not have an out board rest. Great choice, you'll like it.

Re: Retirement Present To Myself

#7

Re: Retirement Present To Myself

Bill Grumbine (Kutztown PA)

>Great lathe Dick! I have turned on one twice now, for a total of seven hours of turning. If I get to the point where I add a second full sized lathe to the shop for turning students, this one is in first place right now.

Bill

Re: Retirement Present To Myself

#8

Re: Retirement Present To Myself

Mike Rubes, Apex, NC

>Hi Dick,

Congrats! That's a nice looking lathe. I hear good things about it. Enjoy it. Get it covered with shavings and post a pic of what you make with it!

Mike

Lathe envy abounds in Apex, NC...

Re: Retirement Present To Myself

#9

Re: Retirement Present To Myself

DD

>You'll love it. I have had one now for 9 months and it's great. What version of SW does it come with now? When you start it there is a version number on the read out. Purchased mine in Oct last year and it came with version 4.22. Rumours out there indicate there is a new version out that permits more agressive speed changes, not that I have found it to be a problem. Have no idea as to how one goes about updating the firmware on the DVR, though.

DGD

Re: Retirement Present To Myself

#10

Re: Retirement Present To Myself

Dick Parr

>Thanks everyone,

I am looking forward to tomorrow when I will start turning with it. After putting it all together today, I am to worn out to try and turn with it to night. I did turn it on and it sure runs nice and quiet and smooth.

Do any of you Nova lathe owners use the vacuum adapter with your lathe? I got one with mine and was wondering what size shop vac is best to use with it, it says nothing about size requirements in the paper that came with it. I will be looking for a newer one then my 15 year old Craftsman, something a bit quieter I hope.

Thanks again

Dick in Knoxville

Re: Retirement Present To Myself

#11

Re: Retirement Present To Myself

Colin Spencer

>Dick

Just done the same thing. I ordered mine on Tuesday waiting for it to come and the retirement at Christmas. Let me know what you find out about the vacuum as I ordered it with mine too.

Colin

Re: Retirement Present To Myself

#12

Re: Retirement Present To Myself

John K Jordan

>>Retirement Present To Myself

Way to go, Dick! Anyone with a shop as fantastic as your's deserves great tools.

I'm envious. I'm going to try to retire next year and can hardly wait so I've already started accumulating tools (with no time to use them.) We'll have to start a local chapter of the old geezers chipmaker society.

JKJ in East TN

Re: Retirement Present To Myself

#13

Re: Retirement Present To Myself

Dick Parr

>Thanks John,

I think you have a good idea there "We'll have to start a local chapter of the old geezers chip-maker society" I think there are enough of us around to get one going.

I still need to make that trip over to your place, hopefully when this weather cools down.

Later

Dick