New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Source - SG Wheels

Posts

Source - SG Wheels

#1

Source - SG Wheels

Mark Mandell - Gone Round In Jersey

>Looking for a 6" x 3/4" (or 1") 120 grit SG grind wheel (Norton), but so far not found anyone who carries them. Tried McMaster, Enco, Reid and Grainger, but not coming up.

Anyone have a source and pricing?

Thanks

M

Re: Source - SG Wheels

#2

Re: Source - SG Wheels *LINK*

William Duffield, on the Cohansey

>Mark, Joel at Tools for Working Wood carries 3X wheels, which are SG technology. Give him a call at 800-424-4613 and you should have them by tomorrow.

Follow the link for sizes and pricing: Norton 3X Super-Cool Grinding Wheels

Re: Source - SG Wheels

#3

Re: Source - SG Wheels

William Duffield, on the Cohansey

>Oops, calling him would be a very good idea, as his website only shows 60 grit wheels in stock.

Re: Source - SG Wheels

#4

Re: Source - SG Wheels *another LINK*

William Duffield, on the Cohansey

>A couple weeks ago, there was a discussion on cool grinding wheels on the hand tool forum. Another company's name, Radiac, was also recommended by Bill Tyndall. You might find the whole conversation interesting.

I've Discovered the Secret to Cool Grinding

Re: Source - SG Wheels

#5

Re: Source - SG Wheels

Mark Mandell - Gone Round In Jersey

>Thanks, Bill, will do.

M

Re: Source - SG Wheels

#6

Re: Temperatures

Mark Mandell - Gone Round In Jersey

>Appreciate the discussion, but I'm following up on a rec to use the Seeded Ceramic wheels to better sharpen the A-11 and 2060 alloy tools I have. It's not a question of heating etc.

Mark

Re: Source - SG Wheels

#7

Re: Source - SG Wheels *another LINK*  *LINK*

Ron in Drums PA

>


Link

Re: Source - SG Wheels

#8

Re: Source - SG Wheels *LINK*

BOB OSWIN

>I don't mean to misdirect you in your search for a decent grinding wheel, but I would point out that once the bevel has been established by grinding that most of my day to day sharping is done with this inexpensive belt grinder.

The belts are quick change and you can get them in some pretty fine abrasive coatings as well.

I find it removes less steel and creates almost no heat.

Besides its quick,

regards

Bob


http://www.leevalley.com/wood/page.aspx?c=2&p=44884&cat=1,43072.

Re: Source - SG Wheels

#9

Re: Hartville Tools Business Practices

William Duffield, on the Cohansey

>Do you have an e-mail contact link to Hartville Tools? I don't buy from companies who require cookies before they will show me product, prices, help or any contact information, and I'd like to tell them that's the way I feel I have to do business over the internet. I'll be glad to turn on cookies after I have decided I want to buy something from them, but requiring me to accept cookies up front is akin to turning over my car keys when I walk into an auto dealership. Your link sent me here, in case you'd like to read their explanation: http://www.hartvilletool.com/enable_cookies.php

Re: Source - SG Wheels

#10

Re: Belt Sharpening

Mark Mandell - Gone Round In Jersey

>Bob,

Thanks much. Have used a belt to sharpen; they do very well. What I'm looking for now are the Norton "SG" ceramic wheels recommended to sharpen the "high" alloy and powdered-metal tools.

Mark

Re: Source - SG Wheels

#11

Re: Source - SG Wheels

Mark Kauder, Phenix City, AL

>William,

I hope what you say about them being SG technology. I wonder why they are half the price of the purple SG wheels from Craft Supplies.

Mark

Re: Source - SG Wheels

#12

Re: Belt Sharpening

BOB OSWIN

>Did you try Norton/Bear direct to find a stocking dealer.

If it's new they may not have it but Norton could perhaps get one on the vendors next order for you.

p.s. did you investigate diamond wheels?

regards

Bob

Re: Source - SG Wheels

#13

?

Ron in Drums PA

>Most of the time cookies are used to assist with shopping carts.

BTW Woodcentral also uses cookies

Re: Source - SG Wheels

#14

Re: Source - SG Wheels

William Duffield, on the Cohansey

>If you really need to be sure, call Joel and discuss it with him, or call Norton. I have no direct experience with these wheels, I am only relating what Joel and others who have used them tell us on the Handtool forum.

Re: Source - SG Wheels

#15

Re: ?

William Duffield, on the Cohansey

>That's probably what Hartville is using them for, too. But I have visited many companies with shopping carts, and most of their web developers are smart enough not to require them until you get to the place that you have decided you want to buy something (tossing an item into your shopping cart, for example). You might be surprised at some of the other things cookies can be used for, mostly just annoyances, but I like to be careful.

Re: Source - SG Wheels

#16

Re: Ah - HA!

Mark Mandell - Gone Round In Jersey

>Bill,

Called and spoke to Joel. Nice guy. Turns out that the SG wheels have NOT BEEN MADE in 120 grit, but that they are working on 120 as well as 150 and 180 grit wheels that will give truly fine edges on the "high" alloys without honing. Since I'm on the wait-list, I'll post here when they become available.

Thanks again for the link, Bill.

ps: Mark the CS wheels are 80 grit max

Re: Source - SG Wheels

#17

Re: Source - SG Wheels

Mark Kauder. Phenix City, AL

>Don't get me wrong, I hope you are right!!

Mark

Re: Source - SG Wheels

#18

Re: Source - SG Wheels

Doug Trembath

>Mark, I bought an 8" wheel from CSUSA almost five years ago, after having Mike Mahoney explain the unique characteristics of these wheels. Using a diamond dresser, you can dress the surface to a much higher grit than any other I have ever used. Just kissing the stone will leave a very fine surface finish, looks finer than the Tormec, but you can also dress it to about 36 by crossing the wheel quickly, using a lot of pressure. I have been using the same stone all this time, and see very little reduction in diameter. I think it has prolonged my tool life greatly, as well. Jerry Glaser told me about three years ago that CSUSA had an exclusive on them, that's where he had to get his, at that time. Maybe Norton has expanded the offering dealer list since then.

Doug Trembath

Studio in the Woods

Re: Source - SG Wheels

#19

Re: Source - SG Wheels

William Duffield, on the Cohansey

>Note that Tools for Working Wood's market is to hand tool woodworkers, while Craft's market is turners. How would Norton know that there would be such an overlap, or sharing of information across these two different market segments? That's a rhetorical question, of course. One of the usual participants in the Hand Tool chats is a jeweler, with wide experience in materials, tools and abrasives from that discipline. He often shares much abrasives technology information with us, especially when it it useful in maintaining tool edges. In general, what I try to do is pass on information that I have read on the other WC forums, and provide a reference to its source, but I sure don't have the time or the money to go try them all myself, much less write the in-depth reviews that we get from people like Lyn.