New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Dumb question

Posts

Dumb question

#1

Dumb question

Carole in VA

>I don't know much about lathes in general and have not yet been able to look at or use a Oneway 1640 in person, only pics on the web. My question is what is the "offset bed" deal? What's this for? Advantages, disadvantages? Looks like you could put a tool rest there for outboard turning?


img

Re: Dumb question

#2

JL

Re: Dumb question

JL

>It is for outboard turning (and hitting yourself on - DAMHIKT). I have used a Oneway with the outboard attachement once - but I was turning between centers in a class and didn't use the outboard capabilities. In your shop, where you can have room on all sides of the lathe, it makes perfect sense.

Re: Dumb question

#3

Re: Dumb question

Jim Davies, Clayton, NJ

>I am not faamiliar with this lathe but my guess is the headstock can be reversed allowing you a bigger swing over the bed.

Jim D.

Re: Dumb question

#4

Re: Dumb question

Mark Kauder, Phenix City, AL

>Carol,

The outboard bed is for turning larger diameter bowls than you can over the regular bed. In the case of the Oneway, it allows you to turn 24" on the outboard side.

Mark

Re: Dumb question

#5

Re: Dumb question *LINK*

Gerry in Maryland

>Carol,

The bed extension allows you to swing a 24" blank over the outboard end. (Remember to throw the lathe reverse switch!) You would probably want the tailstock riser block and a 2436 banjo to accomplish this but the extension is supposed to come with another taller tool rest. (See the Oneway link for details.) The bed extension can be used on the other end too.

Gerry


Oneway 1640 parts

Re: Dumb question

#6

Re: Dumb question

Carole in VA

>Yep, I had a chat with the Oneway folks. 24" outboard. Sounds like the best of both worlds? Oughta be for that price.

Re: Dumb question

#7

Carole, It Looks Just Like Mine :-)

Barbara Gill, Remlik VA

>

Re: Dumb question

#8

and the answer is...

Bob Elliott

>The ways are positioned offset in comparison to the tube to which they are welded. This positioning allows the chips to fall freely to the floor.

Apparently, the 20" and 24" Oneways are not constructed this way.

The optional 24" Bed Extension & Outboard Attachment for the 1640 appears to be constructed like the bigger lathes with the tube directly under the ways.

Re: Dumb question

#9

Re: and the answer is...

Carole in VA

>Optional? Hmmm...I wasn't under the impression that the outboard bed was optional. Guess I didn't ask enough questions today.

Re: Dumb question

#10

Sheesh...I really got a case of the dumbs today!

Carole in VA

>Assumed (wrongly so) that the pic of the 1640 on the site was standard with outboard extension. Heck, for $4000 (including $350 shipping) I figured it ought to include the outboard extension! Duh! Then I went to look at accessories....$295 for the extension, tailstock riser ($199) and the 24" banjo ($225). Sooooo...at some later date should I want to turn 24" bowls I can spend another $710 plus shipping (probably another $200). I think I have just convinced myself that I don't need a Oneway.

Re: Dumb question

#11

Just like car commercials...

Peter Teubel

>You see this really fine decked out car and the price comes on the screen..."From $24,000". Then you squint at the fine print and it says "as shown $35,600".

Re: Dumb question

#12

Re: Just like car commercials...

Carole in VA

>Yeah, they love dunces like me! LOL Right now I am reading real carefully everything I can find on the Powermatic, including the manual and the small print!

Re: Dumb question

#13

Re: Dumb question

Barry Turner

>No, the headstock doesn't reverse. You just use an outboard faceplate and turn over the auxilliary bed. A friend of mine has a 1640 with this setup and loves it.