New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

jet 1442vs lathe

Posts

jet 1442vs lathe

#1

jet 1442vs lathe

Dave Anderson

>I have been turning for about 6 months on a Jet mini (which I really like) and I am starting to look for a larger lathe. I have not read much positive about the Delta lathes. I have not been impressed with the Delta tools that I do own. The Powermatic 3520 or any lathe over about $1200. is out budget. I am looking at the Jet 1442vs or the Nova 3000 (not dvr). I would appreciate any info on these lathes.

Thanks in advance

Dave Anderson In the PacNW

Re: jet 1442vs lathe

#2

Re: jet 1442vs lathe

Oscar

>I have a 1442 that I'm pleased with. I was in the same situation as you had a Jet mini and wanted to up grade to a larger lathe. I feel the outboard rest extension is a joke. It broke the second time I used it. The lathe could be heavier, build yourself a ballast box for it. Buy the biggest, heaviest lathe that is within your budget. Oscar

Re: jet 1442vs lathe

#3

Re: jet 1442vs lathe

Jim Eddy

>I compared the Jet 1442 to the Nova 3000. I bought the Jet for these reasons:

Longer and heavier ways

Variable speed (mechanical)

Cast Iron legs included

100 bucks less.

Re: jet 1442vs lathe

#4

Re: jet 1442vs lathe

CJ

>I also upgraded from a Jet Mini to a Jet 1442 almost 2 years ago. I have no regrets, and happily recommend it to anyone.

Re: jet 1442vs lathe

#5

Re: jet 1442vs lathe

nelson brooks

>The basic Nova 3000 is no longer avaiable only the DVR, unless you find one used you would have to go with DVR, I agree the 1442 is a better lathe because of the sliding headstock, good luck with getting a bigger lathe.

Re: jet 1442vs lathe

#6

Re: jet 1442vs lathe

John K Jordan

>When I went looking for a grand piano years ago I went with the advice: "buy the next one up from the one you think you can afford and you won't be sorry." I did (actually, I bought from several models up) and I have never been sorry. I think the same holds true with lathes.

JKJ in East TN

Re: jet 1442vs lathe

#7

Re: jet 1442vs lathe

Bruce Wiseman

>Hi,

Nelson is right the Nova 300 is no longer being made, however there are many still in the retail pipe line and you should be able to get a close out price. The 3000 requires a manual i.e. move the belt to change speeds. The lowest speed is much lower than the Jet. Changing the belt would be infinately easer than the 1442 and SOME 1442's are very hard on the belts. You can change out the motor on the Nova to a variable speed and / or upgrade it to a dvr. With the outriger attachment you can turn 19 inches. I have one and like it a lot. Email me if you want more info.

Good Luck.

Bruce

Re: jet 1442vs lathe

#8

Re: jet 1442vs lathe

gil

>I have a 1442 that I bought over a year ago. Very happy with it. Try to predict the future and decide how much bigger you will want to turn. If the answer is "over 14 inches" then you will have problems with this one. Get something bigger, or the same size with EVS control. I say this because you can turn the head around for something larger than 14". You will then, of course, lose your tailstock. Also, unless the log (which is over 14") is balanced to start with, the 1442 will want to dance at the slowest speed setting.

Re: jet 1442vs lathe

#9

Re: jet 1442vs lathe

tek-Brunswick, Ohio

>I have a used Nova 3000 that I picked up about year ago. Mine has a 1 HP DC variable speed motor. I'm very happy with it. I like the swiveling headstock. I usually swivel it 45 degrees to work on the inside of boxes and bowls.

Keep checking the classified ads used ones show up. Usually because the owner wants to upgrade to a DVR. I plan on keeping mine for quite a while. It sure is an improvement over the Craftsman Monotube lathe I started on.

Tom

Re: jet 1442vs lathe

#10

Re: jet 1442vs lathe

dick mcneill

>I own & use a Jet 1442. It has some significant problems: (1) its' slowest speed is 450 rpm (too fast for many applications)(2) it has no reverse rotation (3) the speed adjustment arm will block your access to the turning when working from behind the headstock. I wish I had spent the extra money & bought a Jet 1642.

Re: jet 1442vs lathe

#11

Re: jet 1442vs lathe

Dave Anderson in the PacNW

>Thanks to all. It looks like I will get the Jet in the near furture, unless the turning Gods have other plans.

Dave in the PacNW

Re: jet 1442vs lathe

#12

Re: jet 1442vs lathe

Eric

>Word on the street is that Woodcraft will offer this lathe on sale for $765 on July 28. I called my local and they wouldn't confirm, but said that it was "possible". Keep your eyes open for this sale!

Eric