New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Bowl wired for Lightning

Posts

Bowl wired for Lightning

#1

Bowl wired for Lightning

Barry Irby

>I cut some trees off the family farm, harvesting walnut and cherry. One of them was a yard tree from an abandoned tenant house and a clothes line had been nailed to it years ago. The sawyer cut that piece out, naturally. Just as naturally, I decided it was a bowl blank.

Thinking the wire had been nailed there and that the tree had pushed it outward in a curve as it grew, I centered it between the wires and tried for a natural edge with the copper wire in the bottom. Not exactly what I had in mind, but interesting anyway. The bowl is about 15" across the long points and the blank was near the limit of the swing of my lathe.

Turning it and not getting tangled up in the wires sticking out was a challenge. Spent the day making exaggerated arm motions. Sort of like trying to turn a Weed Eater, with it running. So far, I have not gotten cut, but it's still on the lathe and the day ain't over.

It has been interesting. One wire is solid copper and the other is steel with a heavy copper jacket, heavier that plate. I started out thinking it was a single wire. There was a staple and a nail and some steel bailing wire that has mostly rusted away. The form of the bowl was largely established by the shape of the wire in the wood. Another surprise was that the wire is not bonded to the wood at all. Where I cut it free, it just pops out. I guess it's under stress from having been pushed into position by the tree as it grew.

Wood is stained and ugly from the metal. Any suggestion about how to treat the "antennae".


img

Re: Bowl wired for Lightning

#2

Bowl wired for Lightning 2nd

Barry Irby

>Here's the inside.


img

Re: Bowl wired for Lightning

#3

JL

Re: Bowl wired for Lightning 2nd

JL

>Lucky you didn't lose anything.

Re: Bowl wired for Lightning

#4

You better quit while you're ahead!

Carole in VA

>Or at least stop and take that wire out somehow, or your next post is likely to be typed with 9 (or less) fingers!

Re: Bowl wired for Lightning

#5

Re: Bowl wired for Lightning

Barry Turner

>No.........but you might want to go ahead and dial 911 while you still have plenty of fingers and the eyesight to read the numbers. That bowl is an accident waiting for a place to happen! I suggest you abort on this one RIGHT NOW and hang that thing on the wall as a relic of the most potentially dangerous day you ever had! (It already has a built in hanger!)

Re: Bowl wired for Lightning

#6

Since we haven't heard from him

Carole in VA

>since 11:48 this morning, I hope it's not too late!

Re: Bowl wired for Lightning

#7

Re: Bowl wired for Lightning

RevDoug

>Pull what is loose and cut it out of the blank before you do get hurt. It's just not worth loosing a finger or worse. If there is some of that wire that will come loose as you further turn the bowl, dig it out, cut it out, what ever you need to do so that it doesn't come flying out when you least expect it. You can always go back and fill in a wire depression with some copper to simulate the wire that is "naturally" there.

Turn 'em round,

Re: Bowl wired for Lightning

#8

Weed Eater/Barbed Wire!

Barry Turner

>I only hope you're not right!

He may be out in the yard rigging his weedeater with barbed wire! Some people like to live dangerously!

Re: Bowl wired for Lightning

#9

Thanks for the concern!

Barry Irby

>I made it in both senses. Still have all my fingers and both eyes. Not a scratch. The bowl is almost finished. I reverse chucked it and cut the bottom. There were holes in it and my vacuum chuck wouldn't hold it, but I had left the tail center mark on the bottom, so I jamb chucked it and turned the foot. All that is left is some more sanding and the rest of the finish. I'll do that by hand, no more spinning. It's a little heavier than i like, but the sides are about a half inch and fairly uniform. part of me wants to take a little more off near the foot, but I think it's time to quit while I am still in one piece.

Don't think I would do it again, but then where would I ever get another blank with copper wire in it?

I'll post the finished product. I ended up doing some of the shaping by had, with a grinder and sanders, The wire was in the way near the rim. I'm considering putting the nail and staple back where they came out and gluing them in place and sanding them smooth. What do you think?

Re: Bowl wired for Lightning

#10

Whew!

Carole in VA

>Glad you're still ten fingered and two eyed! What you did sure looked scary!

Re: Bowl wired for Lightning

#11

In the future...

Peter Teubel

>...you could simply tape up the wire to the outside of the bowl (masking tape followed by duct tape) to secure it from becomming a finger-slicer.

Re: Bowl wired for Lightning

#12

Re: Thanks for the concern!

John K Jordan

>>Don't think I would do it again, but then where

>would I ever get another blank with copper wire in it?

Well, you could grow some but it might take a while. :)

I have plenty of trees here with embedded barbed wire if you want some more fun. I also have some thick slabs of walnut from which I removed half of a file and part of a pocket knife with the help of a metal detector. The other half of the file is still somewhere in one of the slabs which might make an "interesting" turning.

(I HATE it when I hit embedded barbed wire with my chain saw!)

JKJ in East TN

Re: Bowl wired for Lightning

#13

Re: Thanks for the concern!

Barry Turner

>I'll bet your chainsaw hates it, too!