New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

A note On Dust Collectors

Posts

A note On Dust Collectors

#1

A note On Dust Collectors

Barry Irby

>I have one of the 1 1/2 Hp Delta DC's hooked up to most of my tools in the shop. Most, but not the lathe. I have a four inch hose I use will sanding, but basically I just let the shavings fly while roughing. Turned a fairly large apple bowl from green wood. Got great long curls of shavings. Saved some to use flavoring stuff on the grill and vacuumed up the rest with the hose on the DC. Later I noticed the DC making a somewhat odd sound and it did not have much suction. Unplugged it and removed the hose from the blower. It was full of apple curls wrapped around the impeller. Cleaned it out and it's much better. Those long curls are fun, but next time I will throw them directly into the trash.

Re: A note On Dust Collectors

#2

JL

Re: A note On Dust Collectors

JL

>Put a secondary collector between the impeller and the main. I put one on as I prefer emptying it as opposed to taking the bag. My $0.02.

Re: A note On Dust Collectors

#3

Re: A note On Dust Collectors

Barry Irby

>Good thought. I made a mistake when I built the shed for my DC outside the shop. I put the base down in a dug out spot and it's a bear to change the bag. The Intermediate collector would cut way down on changing the bag and keep the big crap out of the impeller. Thanks for the idea.

Re: A note On Dust Collectors

#4

Re: A note On Dust Collectors

Eaglesc

>I use a home made separaror with two small DC's hooked in tandem per Bill Pentz's suggestion.

HF portable and a Delta AP 400.

I should have bought one big one but the HF unit was on sale and I have been using it for 2&1/2 years.

Both are installed in the attic of my"shop" and are piped to the collector outside.

The upstairs units have cloth bags and rarley need to be emptied.

I emptied the separator after 6 months. I wound up using a Leaf hog to suck it empty and transfer the "shavings" into a couple of garbage cans.

The 2 small DC's run a 6" main.


img

Re: A note On Dust Collectors

#5

Re: A note On Dust Collectors

Ron in Drums PA

>Here is a photo of my separator


img

Re: A note On Dust Collectors

#6

Re: A note On Dust Collectors

Ron in Drums PA

>Inside


img