New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Grizzly H6265 Four Jaw Chuck

Posts

Grizzly H6265 Four Jaw Chuck

#1

Grizzly H6265 Four Jaw Chuck

Mac McAtee

>Anyone know about this chuck? It sells for $89.95 on the Grizzly web site, you can get two other types of jaws for it. Is it a good deal or junk? Anyone done a comparison to other chucks? I know it would not rate up there with the $200 chucks but is it something that is all trouble all the time or is it OK for what it is intended?

Re: Grizzly H6265 Four Jaw Chuck

#2

Re: Grizzly H6265 Four Jaw Chuck

john Lucas

>Mac

I don't have my catalog in front of me but if that is the one that is a copy of the Vicmarc it is a fine chuck. I have 2 Vicmarcs and the Grizzley. The Vicmarcs are smoother with less slop but so far the Grizzley has worked fine and I think it is an excellent bargain. If your really serious about turning save a little longer and buy the Vicmarc or Oneway Talon. They will server you for a long time. John

Re: Grizzly H6265 Four Jaw Chuck

#3

Re: Grizzly H6265 Four Jaw Chuck

Bob Lemon, Sacramento CA

>Mac, check out the new set at Penn State. It comes with 4 sets of jaws, accessories, and wood box. It's called the Barracuda 2 key chuck system, priced at $155. I haven't bought one yet, but I plan to. Bob

Re: Grizzly H6265 Four Jaw Chuck

#4

Re: Grizzly H6265 Four Jaw Chuck

Bob R WestMac Turning

>Hey Guys

I heard about this Grizzly chuck, but have been unable to get any info. Need a inexpensive chuck to learn with. Please advise.

Thanks in advance

Bob R

Re: Grizzly H6265 Four Jaw Chuck

#5

Re: Grizzly H6265 Four Jaw Chuck

john Lucas

>Bob

As I said above I own one and think it is a really chuck for the money. It doesn't work as smoothly as the Vicmarc that they copied and it has a little more slop but as near as I can tell it works just fine. It grips tight and the grip seems repeatable.

Part of me hates to promote it because it is abviously a direct rip off of Vicmarc. However I remember all too clearly wanting a chuck and putting it off for a year or more because of the expense. Wish this chuck had been around then.

Re: Grizzly H6265 Four Jaw Chuck

#6

Re: Grizzly H6265 Four Jaw Chuck

Bob R WestMac Turning

>Thanks John

I have been getting behind, but late last night I was able to spend some time looking and got to the Penn site and am getting some info from them I hope.

I believe this will get me started in this area.\

Thanks Again from a newbe

Bob R

Re: Grizzly H6265 Four Jaw Chuck

#7

Re: Grizzly H6265 Four Jaw Chuck

John Morovich

>Just recieved a H6265 from Grizzly, it was back ordered since March.

The chuck has a good balance and grips well , maybe a little slop in the mechanism butthe holding power is there. Done two small bowls and two peppermills with no incidents. Have not tried using my other jams from my Talon chuch to see it it would fit.