New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

alcohol drying method?

Posts

alcohol drying method?

#1

alcohol drying method?

vicmarc.fan

>I want to start a new thread on alcohol drying as the last thread is quite old and I don't remember much about the method. I have cored out several bowl blanks about 1" thick and coated them with anchorseal and don't know if I can now soak this wood in alcohol. I think I am not a fan of anchorseal as it seems to only delay the cracks, not stop them. These pieces are too big to fit my microwave or I would dry them this way.

Ron

Re: alcohol drying method?

#2

You can soak the bowls

Dave Smith, Longview, WA

>Hi Ron,

I would scrub off as much of the Anchorseal as I could using alcohol. Alcohol dissolves wax and it will eventually settle on the bottom of the container or the bowl. How long have the bowls been sitting since turning them? I would normally soak a one inch bowl overnight but with the wax on them, soaking a day or two would not hurt. Read the alcohol drying article in the articles section here on WC for all the details. Email me if you have any doubts on the procedure.

Dave Smith

Master wood pickler in Longview, WA.

Re: alcohol drying method?

#3

Re: You can soak the bowls

Pat Mulligan

>I have noticed that alcohol soaking seems to kill the mildew problem I have been having with some bowls.Almost no mildew at all on the soaked ones- the boiled ones really getting a bad case of it.This was on norway maple and walnut with wide sapwood.

Re: alcohol drying method?

#4

Re: You can soak the bowls

Jim King

>We have the same problem with boiled wood. The mold grows very well and very fast. To solve this we dip them in a very strong solution of swimming pool chlorine and water after boiling and no mold. A pound of powdered chlorine to five gallons of water.