New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Lathe Colours

Posts

Lathe Colours

#1

Lathe Colours

Mike Swain

>Hello All,

During a recent thread about the new Silverdrive range of lathes, one of the points raised was that of the colour of the lathe, in this case a red maroon.

Although the colour of the lathe has no bearing on a lathes performance, cosmetically it could impact on the turner. When my Powermatic arrived in the UK I was dissapointed, it was painted white, the colour chosen by Axminster the British importer and not the mustard colour seen in the US.

If any of you had the choice to change the colour of your lathe what would it be and why?

Regards....Mike Swain RPT

Re: Lathe Colours

#2

Re: Lathe Colours

Barry Irby

>I bought a Nova DVR. Gray. I like gray. Have gray hair, drive a silver car. Wonder if I was tricked? Again?

Re: Lathe Colours

#3

Re: Lathe Colours

Kudzu

>Well I am looking for a older lathe at the moment. Odds are that when I find one it may need rebuilding. If so I was just thinking today about what color to paint it. The old Rockwell/Delta's come in that old indsustrial grey (so boring). I hate the mustard yellow on Powermatics. I like the old powermatic green. White shows every dirt spot on it. But I was thinking about RED! :-)

Re: Lathe Colours

#4

Re: Lathe Colours

Fog Tanner

>If you read some of the books on interior house painting, there are typically sections on color selections and moods. The darker colors tend to be more subdued or depressing. They can put you in a bad mood just being in the room - like listening to coutry western music. The reds will increase your heart rate and can make you nervous or excited. One of the reasons its used in better brothels everywhere. Green's tend to be more passive and restful. Like a fields of grass, makes you want to lay down and take a nap. The yellows are like sunshine, they present a feeling of summer and generally provide a good mood.

My model airplane workshop is a light yellow, I have the feeling of summer all year long. A little rock n roll and its like being at the beach, even in Janurary. I have one lathe that is a "machinist gray" and the other is a Vicmarc which is a shade of blue. If I were going to repaint either/both lathes, I would go with a shade of yellow (probably Pennzoil Yellow) and a metalic blue for contrast. I would clearcoat (Delclear) them for easier cleanup and protection against some of the finishes. Yellow shows dirt very qucikly. Those colors are also the same colors I painted all my raceplanes, but for a different reason. Yellow is one of the most visable colors at a distance, only behind certain oranges.

Probably the best paint for a wood lathe is one of the "graffiti" paints. Nothing sticks to them, making cleaning off finish very easy - it just slides off.

Fog

Re: Lathe Colours

#5

Re: Lathe Colours

Jim Shaver - Oakville, Ontario

>Hi Mike,

I have a Green coloured General and a White coloured Jet... I love these two colours!!

Take care,

Jim

Re: Lathe Colours

#6

Dick Hines

Re: Lathe Colours

Dick Hines

>Dark blue with flames. That way it would match my bike. Purple would be nice also.

Re: Lathe Colours

#7

Re: Lathe Colours

Bruce in Saint John N.B. Canada

>My lathe is green (General), I think that grey would be a better choice in my books. To me grey is a nautral color for wood working machinery. Perhaps they painted your Powermatic white so you could pretend you had a Oneway.

Re: Lathe Colours

#8

Re: Lathe Colours

vicmarc.fan

>I think Vicmarc blue is a nice color. I turn mostly walnut so a brown walnut dust color would be fine with me.

Ron

Re: Lathe Colours

#9

Re: Lathe Colours

Jim King

>As we live in the jungle our home made lathe is green and it in its self has never made me happy or sad. What makes me happy is what is done on it.

Re: Lathe Colours

#10

Re: Lathe Colours

Sam Dean

>Well, given my choice for a custom paint job, I would go for a metallic pearl yellow with orange and blue flames! If I did this for a living, and the color of the lathe might actually make a difference, I would definately pick white. When the rough edge of a natural edge bowl is spinning around, it's much easier to see against a white background. Dark, matte colors make it harder to see the spinning edge.

Sam

Re: Lathe Colours

#11

Re: Lathe Colours

Bill Crommett

>If it really made a difference, it would be nice for my lathe to be the color of General green when it was new. However it is not impotant enough to clean off all the goo, glue, gunk, and dyes to get down to the original, If it were pretty it wouldn't be happy in my messy garage.

Re: Lathe Colours

#12

Bright Yellow... 

Peter Teubel

>


img

Re: Lathe Colours

#13

I see a red lathe and I wanted it painted black

Raymond Overman in SC

>Flat black is what I painted the enclosure/ballist box on my older than me delta rockwell. It's what I had on hand. I like it and I'm never depressed when I have lathe time.

Re: Lathe Colours

#14

"BETTER Brothels", Fog?

Ruth Niles

>And you know this, how? No, no, don't answer that.

I like green, my General is green, I'm happy.

Re: Lathe Colours

#15

Re: Bright Yellow... Whoa!

Ruth Niles

>Peter, that sure is YELLOW! Cool. Does it glow in the dark?

Re: Lathe Colours

#16

Why, Kentucky Wildcat Blue Of Course!

RevDoug

>

Re: Lathe Colours

#17

Re: Lathe Colours

john Lucas

>Mike

I'd like to have a mood lathe that changes color according to my mood. That way when I blow a piece up it will turn red and everyone will know to stay out of my way. Of course it will turn green when it gets near a Stubby.

Re: Lathe Colours

#18

Re: "BETTER Brothels", Fog?

Fog Tanner

>The miracles of modern electronics and the internet, also the library helps too.

With the current strain of "social disease", a number of brothels in Nevada are making more money in the souvenier business. One of those curiosities for business travelers to go get a t-shirt that they take home to their wife. Of course the guy that drags you into the place doesn't tell you what his wife did to him .. And then there are the districts in some of the European cities that have the large picture windows clearly showing the inside decor (red). And there is always the issue of Better Brothels and Gardens.. :-) ...

Re: Lathe Colours

#19

Re: Lathe Colours

Ron in Drums PA

>I'm partial to alot of chrome with a corithian leather interior and burled walnut trim.

Re: Lathe Colours

#20

Re: Lathe Colours

RonZ

>Hmmm...

Well since if you actually use the lathes they get very dirty so IMHO white is a dumb color. Blue is my favorite color so owning two Vicmarcs are a plus [the lathes were chosen for quality not color]. Cindy Drozda painted her Vicmarc purple so I guess color is important to some. To the gentleman who got the white powermatic, it's yellow in the USA and since it was bought out by Jet, its sold as Jet outside the USA and comes in Jet white.

Re: Lathe Colours

#21

Re: Lathe Colours

john Lucas

>Ron

I think someone should come out with a Harley Davidson Model. Lots of chrome and you could probably get some rumble out of the headstock if you really tried.

Re: Lathe Colours

#22

Re: Lathe Colours

John K Jordan

>I'll go for a camo model, painted like chips, curls, and dust of walnut, maple, and cocobolo. I'll paint the floor the same color. Then I'll never have to vacuum again.

JKJ in East TN