New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Good Beginner Video?

Posts

Good Beginner Video?

#1

Good Beginner Video?

John Kissel

>Hi,

Recently I inherited a lathe from my uncle and am interested in learning how to turn. Any suggestions on a good introduction to turning video? I've looked through some books but it seems that actually seeing someone at work would be most helpful. I tried doing a search of the forum and didn't have any luck. I'd especially like to hear from other folks who have recently started turning. Also, I'm left handed and wasn't sure if this would have any impact on the process. Thanks in advance for the help.

Regards,

JK

Re: Good Beginner Video?

#2

Re: Good Beginner Video? *LINK*

CapeMayMike

>JK,

Welcome. Hit the link for the best turning video on the market. Check the library and half.com for books by Richard Raffin. Check the AAW website for the location of a nearby club, you'll get a tone of help and info there.

Mike


http://www.wonderfulwood.com/dvd.html

Re: Good Beginner Video?

#3

Video resources

mainebowlman

>John, I agree with Mike on Bill's video. A+++

Also check your local Library. Many are connected with other County and State libraries and have quite a resource to draw from. I was surprised that my town of 4,500 has a library with THREE hour long turning videos in its own stacks. Whoda thunk???

Also had a friend who gets the DIY channel and was kind enough to tape 6 of their woodturning programs for me.

Jack

Re: Good Beginner Video?

#4

Re: Good Beginner Video?

Carole in VA

>Left or right handed...doesn't matter 'cause you need to be able to do it either way when turning! Not that hard...it's not like trying to write with your off hand. Bill G's video is an excellent one for learning to turn bowls, but if you have never turned anything before, you might want an intro to turning video that discusses the basics to start with. Can't think of any titles at the moment, but I know they are out there.

Re: Good Beginner Video?

#5

Re: Good Beginner Video?

Ed Kelle

>Woodturning: A Foundation Course, by Keith Rowley. Its a Video as well as a book. Very good to start with.

The second one you want is Bill's. By far one of the best and most entertaining turning videos I have ever seen.

I'm a lefty too, you will learn to do some things left handed and some right handed. Just experiment and you will find what works best for you. Good luck and enjoy

Re: Good Beginner Video?

#6

Re: Good Beginner Video?

Duane C.Leach

>Videos and books are both good learning tools. But you can not beat the hands on learning in a class room with an instructor. Try to find someone who is a good one on one teacher. The fewer students in the class the better. It is not necessary to spend big big bucks to learn the basics of turning from some big name turner. Find a local turning club. They will be glad to head you in the right direction. And loan the videos to you for free.

Happy turning.

Duane Leach

Re: Good Beginner Video?

#7

Re: Good Beginner Video?

TomW in SouthJersey

>As a fairly new lefthanded turner who hasn't taken a class yet but plan to I can add my voice to those who recommend Bill Grumbine's DVD. It starts with a log and ends with a bowl. Watch it periodically after doing some turning and each time you'll pick up something new.

And he's entertaining too!

Also pay attention to the posts here and learn a lot about turning, sharpening tools and finishing to name a few things.

Tom Wright

Re: Good Beginner Video?

#8

Re: Video resources

Nick Stagg

>A Lesson with Chris Stott, First Steps In Woodturning

For a beginners video, there's not a better one to get you started. If you join a turning club they'll probably have it in their library.

Good Luck

Re: Good Beginner Video?

#9

Re: Good Beginner Video?

Craig Daymon

>Excellent beginners video. Takes you from start to finish and, especially if working with dry wood, you'll have your first project done in no time. Good music too and a bit "friendlier" than many of the others I have seen.

-Craig

Re: Good Beginner Video?

#10

Re: Good Beginner Video?

Barry Irby

>Everyone leaped to the conclusion you wanted to turn bowls. If you do, get Bill's and the other recommended, but if you want to turn spindles, Bill's won't help much. Some of Raffan's stuff is on spindles.