New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Need a chuck

Posts

Need a chuck

#1

Need a chuck

Bob R WestMac Turning

>Thanks for all the good info on a grinder. (It's on order)

Now I need a chuck.

Max. 12in. dia. turning. No pens (at this time).

I have not used one, but have seen them used. I need something better that face plates, for some work.

THANKS

Bob R

Re: Need a chuck

#2

Re: Need a chuck *LINK*

John K Jordan

>There are a number of good chucks available and everyone has their favorites. Mostly, the favorite is the one you happened to buy! (I happen to use Supernova chucks and I'm happy with them)

You might do a search of this forum since there was a recent thread that discussed various chucks. OK, I did the search and found one thread for you. There is more discussion so you might want to search again.

JKJ in East TN


"Which Chuck?" thread

Re: Need a chuck

#3

Re: Need a chuck

Bob R WestMac Turning

>Thanks John

Now I know where to start looking.

Bob R

Re: Need a chuck

#4

Brad Vietje

Re: Need a chuck

Brad Vietje

>I would start at your local turning club. If you ask turners which chuck(s) they use and ask them to show you why, you'll get a great education for free. Also, if you ask 10 turners, you'll get at least 11 answers ! The information in the archive link will be helpful, but a hands-on, one-on-one education will be even better.

Safe Spinning,

Brad Vietje

Thetford, VT

Re: Need a chuck

#5

Re: Need a chuck

MountainMan

>Hey Bob R

If you don't want to lay out all of the $$$ for a big name chuck - take a look at the last page of PennState catalog... they have a great looking system with most of the chuck jaws included - for around $150.... I have not used one - if I didn't have my Nova chuck system/and all of the different jaws - I would give these a look...!

Regards

The MountainMan