New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Dream Machines, long winded

Posts

Dream Machines, long winded

#1

Dream Machines, long winded

Ken Romines

>I just finished reading about the Silverdrive/Poolewood lathe in an earlier thread (today). There were several comments made about the design changes people wanted to see in this machine.

I am very slowly finishing my shop and renovating the machines that I have, including a lathe. In a prior life (20 years ago) I used a wood lathe a lot for spindles and occasionaly for bowls. So I have some definite ideas about what I want in a lathe (22-24 inch swing, variable speed, at least 36 inch capacity and a base that is weighs more that I do {don't ask, its a lot}). I want to make hollow forms and platters. How much bed capacity do I need to use a 'Jamison' style boring bar? How much throw is good in the tailstock? How much horse power do I need? What else do I need to consider?-besides classes.

What I would appreciate is your suggestions about design elements that you particularly like in your machine or that you want in your dream machine.

Thanks in advance, you guys and gals have already helped in the design and goals for my shop than you will ever know. (Even if my wife thinks my shop is the sink hole for the national debt.)

Ken Romines in Lubbock, Texas

go Lady Raiders

Re: Dream Machines, long winded

#2

Re: Dream Machines, long winded

Rick Allen

>One of the issues that can keep the dream from becoming a nightmare is the ability to get service. A lathe with incredible specs isn't much good if you have to jury rig a repair or secure the services of a machinist to get the lathe back in service.

Serious Lathe was a terrific lathe with incredible specs and it isn't be made anymore.

Woodfast made a terrific lathe that isn't being made anymore.

Good Luck with your quest.

Re: Dream Machines, long winded

#3

2 lathes *LINK*

Terry Daniel

>Ken, if you plan to do a lot of turning and a lot of variety in shapes then you should consider 2 lathes. If you plan to turn occassionally then go for a good one with sliding headstock or outboard toolrest. If you plan to turn a lot of large hollow forms then consider a bed extension or a long bed lathe. I constantly go from one of my lathes to the other. I may start a piece on my VL300 and then switch it to the VB36 and later back to the 300. Each lathe has its own unique advantages for certain cuts. For instance, once I have my piece roughed out I will move it to the VB for shaping the outside. I can get much better flowing curves when I face the work from the end and I am out of the line of fire if things go wrong. Once the outside is shaped it is back to the 300 with the Jamieson for hollowing. I do most of my finishing on the 300 because it was so skinned up in shipping that a little oil won't hurt a thing.

TD


http://www.theoldrebelworkshop.org

Re: Dream Machines, long winded

#4

Re: Dream Machines, long winded

Lowell Converse

>My Serious Lathe was supported quite well by Bernie until he sold the company recently. In fact, he assured me when I bought the lathe that he would support it no matter what. He was good to his word. The new owner, who is now building the lathe, has also provided me with good support. Mine may be a collector's item, but I'm not worried about keeping it up and running.

Re: Dream Machines, long winded

#5

Re: 2 lathes *LINK*

Keith Newton

>Ken, I think about 1 HP per 5" diameter is about what I like for enough power and speed ratio to keep the chips flying as you get bigger. Besides weight, a wide stance is beneficial.

The taller your work becomes, or the further out from the faceplate you get, the wider the space needs to be between the bearings in the headstock.

I built my own. It weighs in at 3000#, has a 4.5" dia arbor, powered by a 5 HP 3 ph motor with a VF drive.


http://treetales.com