New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

turning blank prices

Posts

turning blank prices

#1

turning blank prices

Tom Sontag - St. Louis

>Once again I turn to this knowledgable board for advice. As the subject suggests, my question is about blank pricing, or actually burl pricing. I know how to calculate board footage and also how to weigh smaller items, so pricing by bf or poundage is within my range. But have any of you bought (for cash money - I know, sorry) burls in very rough chainsawn right-off-the-trunk form (that is, not neatly bandsawn squares)? It seems that selling by weight makes the most sense for odd wedge shaped medicine ball sized hunks. But dang it, I cannot even figure out how to weigh them. It was all I had to roll them onto a pallet. I can't see buying a large scale to sell a few burls. So maybe a rough cubic measure is easier. I would need to think each one out fairly carefully. Or maybe something like: "basketball size $20, beachball size, $25, medicine ball sized $40," etc.

How rare or desirable are mulberry burls? Got any pictures of mulberry burl pieces? And before you get all excited or the moderator reaches for the rule book, this is not a solicitation since we do not ship. For comparison, we sell #1C cherry for $3/bf, FAS for $4. So we have what you might call sawmill prices, i.e., no middleman markup. Just shoot out some comparable numbers and how you would go about it and you will have my sincere appreciation.

Re: turning blank prices

#2

Re: turning blank prices

George Van in WI

>Tom, do you kiln dry your cherry?

Re: turning blank prices

#3

Re: turning blank prices

John K Jordan

>>I can't see buying a large scale to sell a few burls

You might get four cheap bathroom scales, pry up the pallet, and put one under each corner with a block to put the weight in the center of each scale. This would work best on a concrete floor.

I've gone to a couple of sawmills around here who gave me burls since they were "worthless". One guy said he saves them since wood turners like them.

JKJ in East TN

Re: turning blank prices

#4

Re: turning blank prices

Mike Schwing from Md.

>Tom I buy burl by the pound, a pallet at a time. I buy from a fellow in Oregon, he gives me a per pound price, and I give him a dollar figure of how much I want to spend. I call the shipping company and they do the rest. I've done this twice in the past year, and it works out favorably for me. I wind up reselling about half of it to friends and at the local turning club. Last time I had fresh cut maple burl priced at .80/lb in Oregon. Shipping brought it up to $1.30/lb. I resell it for $5/lb, still a good deal as anywhere you can buy it locally will run you $10-20/lb. Special sized/shaped burls are priced per unit, but generally the price I resell is $5. I'm not in it for the money though, just to recoup my costs. Sometimes I sell ready made, circle cut, center marked blanks on ebay. THAT can be profitable.

Maple burl prices are ridiculous. People readily buy maple burl blanks, in sizes about 10"x10"x2", from Woodcraft for $60 or more.

I have a good supply of cherry burls available to me locally for free, and I almost prefer them to maple burl, but they don't grow in the same size as pacific big leaf maple. Occasionally I get a mulberry burl, too. They're nice but they go a very, very dark brown rather quickly.

Re: turning blank prices

#5

Re: turning blank prices

Gary Evans, Tallassee, TN

>Hi Tom,

I've found that unless I'm dealing with a customer who is already familiar with the look of a particular wood, I can sell the burl more readily by going ahead and breaking it down into turning blanks. This makes bf measurement a whole lot easier, also.

By the way, here is a pic of a little piece of burl that I bought this past weekend. It is supposed to be American Chestnut, but I haven't verified that yet. We had to cut it into quarters to be able to load it with a small bobcat.

Gary


img

Re: turning blank prices

#6

Steven Antonucci

Subtle Gloat? Nice score!

steve antonucci

>I had a 800# white oak burl that I let pass by me that was about that size. The guy slabbed it, and I ended up buying 2 or 3 pieces. Opportunity lost.

Steve

Re: turning blank prices

#7

Sure hope you're wrong!

Mike Schwing from Md.

>and it looks like white oak to me, but so does, er..did..american chestnut

Re: turning blank prices

#8

Re: Subtle Gloat? Nice score!

Gary Evans, Tallassee, TN

>Hi Steve,

Unfortunately, I just verified that my burl is oak, rather than chestnut. Had my fingers crossed, but no luck.

This burl is not as nice as it looks from the front. It was quite hollowed in spots, but I should still get some 6" thick pieces out of it.

This is one reason that I would advise Tom to cut up the burls. Sometimes a solid looking burl will be pretty hollow inside. I not only like for people to see the beauty of the wood, I like for them to know exactly what they are buying. I've only had to replace bad wood a couple of times in the past 4 years.

Judging by the work involved in unloading the quarters by myself, I think I beat Mike's price of $.80/lb. Of course, by the time I put my labor into cutting up the blanks, I'll probably have $10/lb in it! 8^]

Here's a pic of the back.

Gary


img

Re: turning blank prices

#9

Steven Antonucci

Still a great score...

steve antonucci

>Once you clean it up, I'm betting you still did pretty well.

The burl I had access to was an aerial burl and went entirely around the tree- and it was solid! Personally, I like WO burl, and I think you will too...

Steve

Re: turning blank prices

#10

Re: Sure hope you're wrong!

Gary Evans, Tallassee, TN

>Hi Mike,

You win the prize!

I can tell that it's oak, but not yet sure if it is white or red. The samples I've prepared so far are not totally indicative of white oak. The color of the wood does suggest white oak, though.

Be advised that I don't condone cutting trees just to obtain the burl, and wouldn't take a standing chestnut under any conditions. Those very few living trees should be used in the current work that is being done to produce a virus resistant strain.

My standard is that it is acceptable to take down a sick or dead tree and utilize the burl. Obviously, this tree had been dying for a number of years. I will also take wood that is coming down for some other reason such as clearing for buildings, etc. We have so much "slash and burn" logging in this area that I am careful about my wood sources. I certainly don't want to do anything to encourage such practices.

That is one thing I like about Tom Sontag's operation. Unless he has changed his approach, he primarily is involved in recycling waste trees into lumber. If we utilized more of the wood that is being burned and buried every day, we would have to do somewhat less logging of the trees we have now.

I'll get off my soapbox now and go play with my burl. 8^]

Gary

Re: turning blank prices

#11

Re: Sure hope you're wrong!

Mike Schwing from Md.

>Its still one kick A** burl!

Re: turning blank prices

#12

Re: turning blank prices

Dick Parr

>Gary that is a really big one, I hope you find your way up to Knoxville when you have some of that cut up into blanks. Very nice.