New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

BOWL BOTTOM FINISHING

Posts

BOWL BOTTOM FINISHING

#1

BOWL BOTTOM FINISHING

Jim King

>To answer the questions about how we finish the bottoms here are some photos.

Last night I was ask about Jumbo Jaws, scroll chucks and other things but I don’t know what they are but you can see here what we do.. We really are not up to date with the things you all have up there to work with but we try to do everything in the simplest way we can figure out.

Photo 1: This is our parting tool made out of a piece of chainsaw bar which we use until reaching the point where the screws from the face plate penetrate close to the bowl base .

Photo 2: This is the parting tool made out of the machete for when the screws are very near the bowl base and can touch the wider tool from the chain saw bar. The machete slides between the screw tips and the bowl base for a clean cut..

Photo 3: Sanding the base with 120 and 220 before hand sanding and finishing.

Photo 4: The majority of our customers prefer the velvet on the base so we glue this on the base over the finish. . Sometimes we will make a turned base but it takes a good deal of time the way we have to do it and the velvet or simply finished sells well.

The photos show the wood in a very light color when on the lathe in the shop , I dont know why


img

Re: BOWL BOTTOM FINISHING

#2

Re: BOWL BOTTOM FINISHING

Duane C.Leach

>Hi Jim.

You mentioned in an earlyier post that you don't have access to a scroll chuck. How about a "Longworth Chuck"? It can be made in your shop, and used to turn the bottom of the bowl after the inside and outside are finished. Look on the left side of screen under Articles & Reviews. Then seclect Turning Tools & Techniques. Scrol down and seclect Making A Longworth Chuck by Garrett Lambert.

Happy turning

Duane Leach

Re: BOWL BOTTOM FINISHING

#3

Re: BOWL BOTTOM FINISHING

Ed Kelle

>Jim,

You guys are amazing! Thanks for all the pics and descriptions. Very inspiring.

Re: BOWL BOTTOM FINISHING

#4

Re: BOWL BOTTOM FINISHING

Jim King

>Duane: I never saw that but it is something we can do. I will make one in the next few days. Thankyou for the direction. Jim

Re: BOWL BOTTOM FINISHING

#5

Man, what a sanding disk !!!

Fred in NC

>I could not believe my eyes.... That looks like bloodwood. "muy costoso" (very expensive)

Thanks for posting all the pics showing your process. Very interesting, and also educational. I love the parting tool. I wonder what will happen if I use one like that around here.

Re: BOWL BOTTOM FINISHING

#6

Thanks Jim

Ron in Drums PA

>

Re: BOWL BOTTOM FINISHING

#7

Re: BOWL BOTTOM FINISHING

matt fallon, li ny

>Hey ed!

these guys blow me away too!

lets see what we can do with some of this pecan and cherry stuff soon ;)

we need a nassau county turners SIG hehe

Re: BOWL BOTTOM FINISHING

#8

Re: Man, what a sanding disk !!!

Wally Lloyd, Iquitos

>You're right, it is Bloodwood. It's used a lot around here as a good stable utility wood:-)))