New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Spalted Birch HF

Posts

Spalted Birch HF

#1

Spalted Birch HF

John in Abbotsford

>Had a bit of spare time yesterday to play on the lathe and this is what I came up with. It was a piece of spalted birch still very wet. Measures 9-1/4"h x 6"w

Hollowed out from the end grain to a wall thickness of 1/4".

I've got 1 coat of turners polish on the outside of the form and I coated the inside with end sealer in hopes that it will dry out slowly and not crack on me.

Taken at close up portrait without flash



Taken at close up with flash



Taken at close up with flash


Re: Spalted Birch HF

#2

Re: Spalted Birch HF

John in Abbotsford

>This is my first HF on my new to me General 26020 lathe, I'm thinking that next time I may try this form but turned end for end, ie; what is now the bottom to be the top, omitt the foot and finish the top in a continuation of the body of the form.