New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Husky chain saw sharpening

Posts

Husky chain saw sharpening

#1

Husky chain saw sharpening

john Lucas

>Below are some photos of the Husky chain saw sharpening jig that I like. There may be a better way but this is inexpensive, easy to carry and easy to use. No batteries required. You just put the jig on and sharpen all the teeth that face one side. Then flip the chainsaw, use a different set of notches on the guide and sharpen that side. Then you use the raker tooth guide and if necessary remove a little metal from this tooth. Use the same number of file strokes on each tooth to keep the saw cutting true. That's it.


img

Re: Husky chain saw sharpening

#2

Re: Husky chain saw sharpening

john Lucas

>I forgot to mention that they sell these kits at Lowes with 2 round files and 1 flat file.

Re: Husky chain saw sharpening

#3

Re: It won't work on all chains.

Al Crandall --NE of Indy--

>I use two different chains for my Stihl. One is anit-kickback and one isn't. The Husky jig fits fine on the regular chain, but won't sit down deep enough on the anti-kickback to allow the file to work.

Re: Husky chain saw sharpening

#4

Re: It won't work on all chains.

Carole in VA

>Thanks, Al. I use only anti-kickback chains on my Stihl. You just saved me a few bucks. Wonder if that is true of other jigs?

Re: Husky chain saw sharpening

#5

Re: It won't work on all chains.

Mike Rubes, Apex, NC

>Hi Al,

Thanks for the explanation. I actually bought this jig about a month ago and could not get it to work! The saw is my dad's "starter" Husky, the 141 which I do believe, comes with the anti-kickback chain. Even though I couldn't get the jig to work, the directions provided (with better explaination and pics from Terry D) enabled me to get the chain sharpened "free hand" and it seemed to work fine.

Thanks,

Mike

Re: Husky chain saw sharpening

#6

Re: It won't work on all chains.

john Lucas

>Al you are correct. The sharpening jig works on my other chain but the raker tooth jig won't work. Surpisingly this chain came with the saw. The jig works great on my 20" chain which was aftermarket.

Re: Husky chain saw sharpening

#7

Re: Husky chain saw sharpening

MFoster

>I've tried several ways of sharpening chain including freehand and several jigs. I have landed on this jig for the same reasons that John uses it. It is easy to use, portable, helps to orient the file correctly and also has a gauge for filing the depth gauge (otherwise known as the raker).

Re: Husky chain saw sharpening

#8

Re: Husky chain saw sharpening

Stuart Johnson

>John, Do you by any chance have these photos on a web site or could you email them to me? I would like to see them in larger detail. I just purchased a kit that doesn't seem to fit. The kit is the .325 one and my chain is .325 72 drive link low kickback.

By the way I think there must be a special place in hell reserved for the inventor of those plastic packages that need a crowbar to open.

Re: Husky chain saw sharpening

#9

Amen on the plastic!!!!

Carole in VA

>I have been known to put the darn things on my bandsaw to open them! BTW, if you read down a little farther, you will note that the jigs don't seem to work on the anti-kickback chains.

Re: Husky chain saw sharpening

#10

Re: Husky chain saw sharpening

John K Jordan

>>By the way I think there must be a special place

>in hell reserved for the inventor of those

>plastic packages that need a crowbar to open.

Not the inventor, but the companies that use them. I realize they are intended to reduce theft but they are very frustrating.

One thing that might change the packaging: suppose EVERYONE in the country handed their purchases to the manager before leaving the store and let him open them. Have him remove those impossible stickers as well.

JKJ in East TN

Re: Husky chain saw sharpening

#11

stickers on PVC included?

Terry Daniel

>JJ, do you mean you don't like to peel the adhesive stickers from the end of your fittings before glueing the pipes together? You know the people putting the stickers on are experienced plumbers' helpers because they never miss an opportunity to put the sticker where it has to be peeled off before joining the fittings. You would think they might put them where they would not interfere with the joining?

TD :)