New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

How to tell morse taper on delta lathe?

Posts

How to tell morse taper on delta lathe?

#1

How to tell morse taper on delta lathe?

Bruce, a MN Galoot

>I have an old Delta Dual Duty lathe, dating probably from the 1930's or so, procured the old-fashioned way: I inherited it from my grandfather.

Anyway, I would like to get a live center for the tailstock but I don't know how to determine which Morse taper it requires. How do I tell?

Thanks

Bruce

Re: How to tell morse taper on delta lathe?

#2

Re: How to tell morse taper on delta lathe?

John Lucas

>Bruce

I can't remember the exact sizes but a #2 morse taper is about 3/4" at the big end. #1 is probably about 1/2 or 5/8 at the big end. You probably don't have a #3 and I can't remember what size it is.

There are lots of other tapers but wood lathes almost always have one of those 3.

Re: How to tell morse taper on delta lathe?

#3

Re: How to tell morse taper on delta lathe?

Greg Jensen

>1 MT = 12mm or 1/2" opening

2 MT = 18mm or 3/4" Opening

3 MT = 24mm or 1" opening

Re: How to tell morse taper on delta lathe?

#4

Thanks, guys,

Bruce, a MN Galoot

>I'll check when I get home.

Bruce