New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Boring bar

Posts

Boring bar

#1

Boring bar

Lee Dale

>I would like to make a larger dia boring bar 1 1/4" for my Jamieson D handle. What grade of stainless is easily machined or shoud I use drill rod? I know that there are some knowledeable metal people out there. Thanks in advance.....Lee

Re: Boring bar

#3

Re: Boring bar

Mark Mandell - Gone Round In Jersey

>Lee,

Can't imagine why you'd want to spend the big bucks on stainless steel in such an application. Plain-Jane 1018 cold rolled will do just fine at about 1/4 the price.

You can get a 6 foot length of 1018 from ENCO for about $25 when a 3 foot section of 304 grade stainless will cost you near $50. A 3 foot length of 1-1/4" O-1 drill rod will cost about $26.

Mark

Re: Boring bar

#4

Re: Boring bar PS

Mark Mandell - Gone Round In Jersey

>You will have to cut the diameter down to fit the Jamieson 3/4" fixture, but that shouldn't cost more than $10-15 at a friendly machine shop.

|;-}

Re: Boring bar

#5

Re: Boring bar

Lee Dale

>Thanks Guys....Lee