New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Is Carnuba wax food safe?

Posts

Is Carnuba wax food safe?

#1

Is Carnuba wax food safe?

Mike Rubes, Apex, NC

>Hi all,

Does anyone know if carnuba wax is an OK first finish for a salad bowl? I've got a maple bowl that I finished with mineral oil and then carnuba wax. I've got a friend who wants the bowl to use as a wet food safe bowl and I am not sure about the carnuba wax.

I figure wax is wax, but I thought someone here might know for sure.

Thanks,

Mike

Not near enough lathe time in Apex, NC....

Re: Is Carnuba wax food safe?

#2

JL

Re: Is Carnuba wax food safe?

JL

>It is often blended with other waxes for coating apples, cucumbers, etc. I guess if you can eat it, it must be food safe.

Re: Is Carnuba wax food safe?

#3

JL

Re: Is Carnuba wax food safe?

JL

>I forgot - certain candies use a carnuba or carnuba blend coating to prevent them from sticking together - and also so they won't shed dyes and colors in the hands.

Re: Is Carnuba wax food safe?

#4

Re:thanks

Mike Rubes, Apex, NC

>Hi JL,

Thanks, My friend John will be happy to hear this!

Mike

Re: Is Carnuba wax food safe?

#5

Re: Is Carnuba wax food safe?

Charlie Anderson

>It's one of the ingredients listed on Good and Plenty candy.

Re: Is Carnuba wax food safe?

#6

Re: Is Carnuba wax food safe? Yes...

Arch

>.....as is shellac and jelly wax and varnish and lacquer and mineral oil and sunflower oil and citrus oil and safflower oil and sesame oil and every cured finish I know. I suppose allergens like walnut and peanut oil and as a stretch, an allergenic timber with no finish might be worth considering, but if the finish is well cured and the bowl isn't eaten with the salad, the risk is more in the worry than in the bowl. Anyway, the final finish is usually oil & vinegar rubbed down with garlic.:)

The customer might better worry about who handled the spices, salad greens or fruit in its long journey from field to table and if gentle rinsing removes all the pathogens that hitch-hiked along the way or live on the multi-use chopping block.

More to the point might be to ask what finishes can be made safe for the turner that can't be made safe for the consumer? Just in case, I add the obligatory 'YMMV', :)

Arch

Re: Is Carnuba wax food safe?

#7

Brad Vietje

Re: Is Carnuba wax -- different angle

Brad Vietje

>Hey Mike,

I'm used to carnuba beiung used for pretty glossy finishes, though that may not be what you have in mind in this case...

In general, I wouldn't put a glossy finish on any bowl that was going to be handled and/or used a lot -- especially for wet salads, etc... This may not always be true, but in my experience (excepting marine spar varnish) gloss + water = dull. My feeling is that it will look pretty dull and blotchy after a few uses, and the recipient or customer will want to know how to "fix" it. I'd suggest either a dull finish like oil & beeswax, or a number of soakings with Urethane Oil, or one of the Danish oils, with steel wool or abrasive nylon pads between and after to get a softer look.

If you need glossy, maybe something like a hard polyurethane -- just isn't my favorite look for a functional bowl. I tend to use gloss finishes only for decorative pieces.

Safe Spinning,

Brad Vietje

Thetford, VT