New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Anyone turn Beefwood?

Posts

Anyone turn Beefwood?

#1

Steven Antonucci

Anyone turn Beefwood?

steve antonucci

>Saw it today at Willard Bros, and I thought it was Phillipine Mahogany, but it was much too heavy. I bought a couple of sticks for some tool handles, and spun it up tonight...

My observations:

Spicy smell that reminded me of mahogany. Splintery (turning without shoes on in my bare puddies was like walking on a bed of nails)

Machines well with sharp tools.

Kinda like mahogany...

So my question:

Is it a marketing thing, or is it just mahogany?

Steve

Re: Anyone turn Beefwood?

#2

A Beefwood Pen

Jennifer@Indy.USA

>Steve, I had never heard of it until I saw it on the Arizona Silhouette web page under their pen blanks. I had to try it. The pen turned out really nice although I think there are other woods out there that are far prettier for pen turning. I didn't notice splintering like you did?

Jennifer

Re: Anyone turn Beefwood?

#3

Re: Anyone turn Beefwood?

TomW in SouthJersey

>I just turned some Shedua tonight that gives me splinters every time I handled it. But it turns beautiful and has some very nice grain patterns of light and dark.

You didn't happen to notice if Willard Brothers had any colorful blocks of Canary did you? I've been getting box elder and canary wood from them lately.

Tom

Re: Anyone turn Beefwood?

#4

Hi Steve

Dominic Greco in Richboro, PA

>

Like Jennifer, I've seen pictures of of turned Beefwood pens at Arizona Silhouette's web site. But I've never actually turned any.

I imagine that you're still going to make a tool handle from it, right? Post a picture when you do. I'm curious to see what it looks like.

You know, even with Williard Brothers being as close to me as they are (they're close to Trenton, right), I've NEVER been there. Do you find them reasonable? What's the easiest way to get to them from the Scudder's Fall Bridge/I-95 (closest landmark I can think of)? I'm always on the lookout for exotic woods for pens, bottle stoppers, etc.

See ya around,

My ugly mug

Dominic

Re: Anyone turn Beefwood?

#5

Re: Anyone turn Beefwood?

Bill Grumbine (Kutztown PA)

>Steve, I've turned it a few times. I was given a handful of 1 1/2" x 18" sticks by a guy in Old Bridge NJ. He got a great deal on several pallets of the stuff when it was rejected for pool cue handles. I've made several nightsticks, but to date have not actually used one on anyone. They have all been sold or given away. It is very hard and very heavy, not like any mahogany I have ever worked with.

Bill

Re: Anyone turn Beefwood?

#6

Turning bare

Jim Reed @ Tallahassee

>I am glad to see that I am not the only bad boy who sneaks out to the lathe and turns in bare feet.

Re: Anyone turn Beefwood?

#7

Is This It?

TomW in SouthJersey

>Bill's post about nightsticks reminded me that I bought some wood from Willard Bros. that if I remember correctly was Beefwood. I had bought a cheapo roughing gouge on Ebay and wanted to replace the handle. Here's a picture. Does this look like the Beefwood you saw? If so I remember it turned and finished nicely but I only put a quick finish since it was only a tool handle.

Tom Wright


img

Re: Anyone turn Beefwood?

#8

Steven Antonucci

They had some canarywood

steve antonucci

>Mostly spalted maple blocks for turning from what I remember. Some mahogany.

Seems to be better suited to flatwork, but a good selection of "exotics", but wasn't really looking for them.

Steve

Re: Anyone turn Beefwood?

#9

Steven Antonucci

Hey Dom-

steve antonucci

>I printed directions from their website, which didn't really help. I had to cobble together from various points of origin, but here's what I found;

If you are coming up US route 1 N, they are about 1 mi. off the road on the right. I came down 206 through P-town, and made a turn on the same road, which crossed over US1. I drove past Basin Road, since I thought it was a farm road.

Every mill has something for everyone- Willard's thing for me was their flitches. Always had a thing for them. Lots of curly maple, and some quilted cherry boards that made me wish I had my truck (or at least no appointments that afternoon).

Worth a trip if your close.

Steve

Re: Anyone turn Beefwood?

#10

Steven Antonucci

Yep- that's it.

steve antonucci

>heavy as a brick- I bought it for the mass in the handle, just like you.

Steve

Re: Anyone turn Beefwood?

#11

Steven Antonucci

Standing ankle deep in wet shavings...

steve antonucci

>is one of life's simple pleasures!

Steve

Re: Anyone turn Beefwood?

#12

Re: Standing ankle deep in wet shavings...

Carole in VA

>Until you drop a skew chisel on your foot! That type of near disaster cured me of turning barefoot. That and a big ole spider crawling out of the shavings pile! :)

Re: Anyone turn Beefwood?

#13

Re: Standing ankle deep in wet shavings...

Ed Thomas, Leaside (Toronto) Ontario

>See, working without guards keeps you more aware and cautious. I wonder just how much protection a shoe will give against a razor sharp skew.

Re: Anyone turn Beefwood?

#14

Re: Hey Steve

Mark Mandell - Gone Round In Jersey

>Ran a quick search on Beefwood and found mostly Australian with a cross-reference to "She Oak." I seem to remember some mention about potentially strong allergic reactions to She Oak. If it's the same stuff, it's worth a note of caution for people who are sensitive.

Mark

Re: Anyone turn Beefwood?

#15

Steven Antonucci

Doesn't surprise me

steve antonucci

>I noticed a bit of a reaction (had to blow my nose after a few minutes)...

And I felt itchy. But I'm sunburnt from last weekend, so I might be peeling too...

Steve

Re: Anyone turn Beefwood?

#16

Re: Standing ankle deep in wet shavings...

John Lucas

>None, I dropped my skew and is stick almost 1/4" in the top of my foot through my boot. I usually wear tennis shoes but it was cold in my shop that day.

Re: Anyone turn Beefwood?

#17

Re: Anyone turn Beefwood?

woodspinner/ Bill Hale

>Here is a site for beefwood. It also grows in Az., NM, and California that I know of. In a landscape, here, it is much slower and not invasive. It may be a tradeable from our Florida members.

http://www.nps.gov/plants/alien/fact/caeq1.htm

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Anyone turn Beefwood?

#18

Re: Anyone turn Beefwood?

Rick Allen

>The local wood murchant I deal with had some a few years back. I got a few boards. It is very dense with a good deal of wood movement. When first turned the color is bright and simular to "top round" you would see at the butcher. If left exposed to the light and air it changes color to that of beef jerkey. I made a table out of the stuff. Very heavy, turns well with sharp tools and sands well. You can sand this stuff past 1000 grit to good effect. The wood has a good deal of seasonal movement so you need to pay close attention to the direction of the grain. It is also a good idea to put a finish on it fairly quickly.

The guy I bought it from said that the wood was used as a source of laytex and that the trees were often found the FL.

I made a pasive disc sander out of the wood. In the 5 years I have had that pasive sander (the kind where you drill a hole and stick a velcro sanding mandril in...) I have not detected any wear.

Good Luck

P.S. Funny you should mention Mahogany. It doesn't work like mahogany at all but the color is simular. The finial between the table legs is mahogany while all the other redish wood is beefwood.


img

Re: Anyone turn Beefwood?

#19

Ric Taylor

Try This:

Ric Taylor

>Hi Dom,

Try using the new maps.google.com website. It has awsome capabilities, and gives detailed routing from anywhere to anywhere.

This site is so good that you can type in an address, then type in pizza, and all of the pizza shops for 5 miles around pop up on the map. Or just type in a zip code, the neighborhood shows up, and you can zoom in REALLY close with accurate maps that include all of the side streets and street names.

You can also switch to satellite photo views, and zoom in on those also. That way you can pick out landmarks enroute to your destination.

Click on the Take a Tour link to see all of the capabilities. I use this site almost every day for different things, and I'll never go back to any of the other map sites.

Ric

Re: Anyone turn Beefwood?

#20

Ric Taylor

My Tools Aren't Sharp Enough to Hurt Me

Ric Taylor

>

Re: Anyone turn Beefwood?

#21

That is SO COOL!

Dominic Greco at home in Richboro, PA

>Ric,

I took your advice and spent the last 10 minutes messing around with Maps.Google.com . I gotta' tell ya', that is one of the coolest sites I've run across so far!

The satellite view is just too cool of a feature.

Thanks for the tip,

Dominic