Bookmark Accounts
Home Articles Forums Gallery Marketplace Videos
ADVERTISE HERE - FREE TRIAL

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Help! Does anyone happen to have .. ..

Posts

Help! Does anyone happen to have .. ..

#1

Help! Does anyone happen to have .. ..

MountainMan

>ShopNotes No. 67 - has the neatest "roll-around" for a Mini Lathe... Ha! Wouldn't you know it - they say the issue is no longer avaliable!! However, I was able to print the cut-list and the plywood cut-list.. They just don't publish the picture, assembly notes, or blow-up of the table..! I checked with my Woodcraft store - they carry lots of back issues - except this one - of course!!

So, If anyone has that issue and would be able to scan those pages in and e-mail them to me - I would be eternally grateful!!

Regards

The MountainMan

Re: Help! Does anyone happen to have .. ..

#2

Re: Help! Does anyone happen to have .. ..

Barbara Gill, Remlik VA

>I have an almost complete set of WoodSmith. My Shop notes #67 does not have what you are asking for. What year?

Re: Help! Does anyone happen to have .. ..

#3

Re: Help! Does anyone happen to have .. ..

MountainMan

>Site description says:

Mini-Lathe Stand Woodworking Plan

Turn your mini-lathe into a full-fledged turning center! This stand is rock solid, easy to build, and provides storage for all your turning tools and accessories. And with the heavy-duty casters, you can easily move it anywhere in the shop.

Also includes plans for building an adjustable dust collector hood. This woodworking plan appeared in ShopNotes magazine No. 67.

Re: Help! Does anyone happen to have .. ..

#4

Re: Help! Does anyone happen to have .. ..

Stuart Johnson

>I have the issue but don't have access to a scanner or fax. Send me your snailmail address and I'll send you the magazine. When you are done with it you can return it.

Re: Help! Does anyone happen to have .. ..

#5

Re: Help! Does anyone happen to have .. ..

MountainMan

>Hi Stuart

Thanks for your response - I think I have it now - someone else has sent me the article in PDF - I'm printing it now - looks good!! Thanks for your kind offer!!

Regards

TheMountainMan

Re: Help! Does anyone happen to have .. ..

#6

Re: Help! Does anyone happen to have .. ..

Chipster

>I just finished that bench( with the exception of the drawers). Nice and solid. In the little that I have used it, I almost wish it was a bit longer. I have the Jet mini and Delta 8" grinder mounted on it. another 6" or so would make me a whole lot happier.

Re: Help! Does anyone happen to have .. ..

#7

Re: Help! Does anyone happen to have .. ..

Carol Reed - Strawberry, AZ

>Since you have a pdf file, can you post it so others of us faced with the same problem can make use of it. Or if someone with the magazine and no scanner wants to mail it to me, I will scan it and make it available.

My mini lathe is still in the box, Sighhhhh...........

Re: Help! Does anyone happen to have .. ..

#8

Careful, copyrighted

Tim McGill

>Just a caution to not get too crazy with posting articles that are copyrighted.

Tim

Re: Help! Does anyone happen to have .. ..

#9

Re: Careful, copyrighted

Carol Reed - Strawberry, AZ

>As a writer and author, I am sensitive to copywrites, Tim.

However, when the information is out of print, the rules change. As I understood it, back copies are no longer available.

× Share

Share on

X / Twitter Facebook LinkedIn
✉ Email this page