McNaughton Core Saver Questions4

Re: McNaughton Core Saver Questions4

Eduardo Sarmiento Hall-Lima Peru

>nope the blade goes in the other side I think by waching the video from grumbine

Gracias Eduardo!

Jorge Castaneda ~ Downeast Maine

>

Re: McNaughton Core Saver Questions4

George Van in WI

>Jorge, the blade can be used on either side of the "T" post. It is a matter of personal preference. When I watched Greg Jensen, the US Rep for Mcnaughton use the corer he started on the right, then switched at the end to the left side to get a little more depth before popping the core out.

That's a nice present you were given!

Re: McNaughton Core Saver Questions4

vicmarc.fan

>I don't know what your question was but from the picture you are set up to use the mini system. You can put the cutter on either side of the support. It makes no difference which side you use but I find the side you show wont let you get as far into the wood as the other side will.

Mike Mahoney has a new tape out on this system you might like to see.

Ron

Re: McNaughton Core Saver Questions4

Jorge Castaneda ~ Downeast Maine

>George,

Indeed is a nice present, Thank you much for the info, next day I have some free time I'll give it a go.

Jorge

Re: McNaughton Core Saver Questions4

Jorge Castaneda ~ Downeast Maine

>vicmark fan,

Good to know about the side that goes deeper and about th eMahoney tape, Ill look into that.

By the way I am a vicnarc fan too.

Gracias!

Jorge

Re: McNaughton Core Saver Questions4

Bill Grumbine (Kutztown PA)

>Ola Jorge

I read through your posts, and first, congratulations on a very nice birthday present! To answer your second question, I do not really pay attention to which side of the gate I put the tool, unless I need as much reach as possible. Then I have to think about it some, but in most cases it does not matter.

Have fun with it! Maybe we will get YOU to do the coring demo at Five Barns this year.

Bill

Stealth Gloat #4 Jorge? Congrats!

Gerry in Maryland

>

Re: McNaughton Core Saver Questions4

Jorge Castaneda ~ Downeast Maine

>Bill,

I just visited your site and printed your article.

I did luck out uh? It looks very solid and well made and the fact that the family gave it to me makes it very special.

I'll try to get proficient at it and if I do I'll be glad to do the demo.

Gracias!

Jorge

Thanks!

Jorge Castaneda ~ Downeast Maine

>Thanks Grant,

I did not meant to gloat, but I guess I did...