We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I'm ready to build a box with drawers to reside on the ledge provided on my Powermatic. Is there any reason not to build a base to fit the narrow space
provided then install a deeper cabinet upon it so I can have a deeper compartment. Seems like if it fit tightly it would be stable enough. Or am I missing something?
>You said "I'm ready to build a box with drawers to reside on the ledge provided on my Powermatic. Is there any reason not to build a base to fit the narrow space provided then install a deeper cabinet upon it so I can have a deeper compartment. Seems like if it fit tightly it would be stable enough. Or am I missing something?"
You don't really have to fit that tightly. If your drawer cabinet has sufficient weight to it, it will provide enough stability. When I built the ballast box and the drawer unit for my 1642 EVS, I just cut two 2 x 4s to length and put them in the "slots". My ballast box is not screwed to the 2 x 4s. It just is a tight fit. The drawer unit is screwed to the ballast box.
I think that if you make a unit with "wings" that will fit into the legs, you will be fine. Just take the inner curvature of the legs to account. (DAMHIKT)