Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

First Bowl

Posts

First Bowl

#1

First Bowl

Fred G - Cincinnati

>Okay, in spite of Mr. Wright's lovely maple salad bowl, I thought I'd suck it up and show the first and second bowls I've turned. The first one is maple, nothing fancy, strictly practice, but I like the outside shape.


img

Re: First Bowl

#2

Thin wall

Fred G - Cincinnati

>I did, however, have a little trouble keeping the wall thickness consistent. I kinda squared off the bottom, and the "corner" is about 1/16" thick. When I first saw the a light ring around the bowl, I thought it was a gouge or some sanding that wasn't quite right, but it was light showing through the wall! I was a bit nervous that I'd bust through while I was turning it, but it held together. Thanks for looking.

Fred


img

Re: First Bowl

#3

Re: First Bowl

tek-Brunswick, Ohio

>Hi Fred,

That is a very good bowl for your first one. Here are a couple of tips from another amateur. The transition from the side to the bottom is commonly a trouble spot. You have to swing your gouge faster there than when you are doing the sides or bottom. I accidentally made some funnels because I didn�t get that right. 2nd point, you left the pith or center of the tree in the bowl. That makes the chances of the bowl cracking as it dries greater. I like the bowl shape also, especially if it is a bowl that will be used. It is popular to make the bottom smaller in proportion to the bowl on the �Art� bowls. I hear the AAW chapter in Cincinnati is a very good one. If you are not a member already, I�m sure joining would be very beneficial to you. I belong to the club up in Cleveland and It�s amazing how much I�m learning from those talented turners.

Re: First Bowl

#4

JL

Re: First Bowl

JL

>Nice grain and color.

Re: First Bowl

#5

Re: First Bowl

Fred G - Cincinnati

>tek & JL,

Thanks for the kind words and the tips. I did a bit better with the transition on the box elder bowl, so I'm learning. Leaving the pith was intentional, especially so with the box elder bowl, since a lot of the figure I wanted would have been lost. The maple bowl sat for over a year once it was roughed, so I don't think it'll go anywhere. The box elder bowl actually did end up with some cracking, but I filled those with CA & sawdust, and now I can't even find them.

Re: First Bowl

#6

Re: First Bowl

Mike in Fort Walton Beach, FL

>much better than my first. shot you an e-mail by the way.

Mike in Fort Walton Beach (originally from Cincy)

× Share

Share on

✉ Email this page