Knowledge You Can Build On — Est. 1998
A kiss for Mike Schwing
Ken from SW WI
>nyuk nyuk, A HERSHEY kiss, that is...
:-)
what I told Mike last week on WoW I'd make.
This is 3" dia. and 4" high, with two coats of wipe-on poly.
Another too-loose lid like the cherry one I posted last week, but that has tightened up a bit since then.
Any comments, questions welcome.
Re: A kiss for Mike Schwing
Ken from SW WI
>dagnabbit, I retook the picture after the one I posted, and forgot to write over that copy--so here's the newer version which was under natural light under a cloudy sky vs. the first one, under tungsten.
Re: A kiss for Mike Schwing
Mike Schwing from Md.
>Well damned if you didn't make it. Question on the little twist at the top. Would I be correct to assume it is turned "round" and then half of it is carved away then the remainder shaped? If so, neat technique. If not, how?
Re: A kiss for Mike Schwing
Robert Cox
>Yopu know, I looked at that and thought "Cool" But I never thought about the mechanics of actually making the thing.
Man, do I have a lot to learn.
Re: A kiss for Mike Schwing
Ken from SW WI
>You got it Mike--turn a knob shape with a slightly domed top to the profile of the inside curve, and carve/sand down to the shape.
