Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A good book and finally finished project *LINK*

Posts

A good book and finally finished project *LINK*

#1

A good book and finally finished project *LINK*

Paul in NJ

This is a good book for anyone interested in period furniture. It is available online at archive.org but it is worthwhile having a hard copy.


In addition to the mouldings, there are enough dimensions and views to build many of the pieces.

Now for the finally finished project.

12 years ago my wife was diagnosed with non-hodgkins lymphoma. She knew it would take a toll on her body so she asked me to build a dressing mirror to help with make-up. I found this in the book above:


There was enough detail for me to build it. I started the mirror but had difficulty focusing and made some sloppy dovetails, a chip, or tear out here and there. The lymphoma progressed quickly and my wife passed on 6 months after diagnosis. I didn't have the heart to continue with the project.

Fast forward to November 2019. I came across the box with the pieces and decided to finish. Maybe a little more closure. It was completed in time to be a Christmas present for my daughter.


Despite the flaws it still is a handsome piece. Everyone notices the nice proportions and not my mistakes.

A little bit about the finish. Walnut has a "cold" color. The color can be warmed up with amber shellac or varnish but I was looking for something more. Rob Millard is a period furniture builder in Ohio and had a recipe on his website. I ran some samples with it and decided to go for it. It starts with a coat of ORANGE transtint dye. Here is plain walnut with a dyed piece next to it:


The dressing mirror after dye:


After the dye, a wash coat of shellac (~1 lb.) is applied to seal it. Next a glaze of Minwax mahogany stain is applied.


At this point I applied Behlens pore filler. I am always nervous with fillers, I have had them muddy or cloud the grain.

Thanks for looking.

regards,

Paul Dzioba


https://archive.org/details/furnituremouldin00warnuoft/page/n7/mode/2up

Re: A good book and finally finished project *LINK*

#2

super nice!!

David Weaver

A very warm and comfortable looking piece of furniture without being unrefined or overly simple.

Re: A good book and finally finished project *LINK*

#3

Re: A good book and finally finished project

Wiley Horne

Paul,

It is magnificent, and courageous. Magnificent technically and aesthetically, and a testament to you, your daughter, and your dear wife.

Wiley

Re: A good book and finally finished project *LINK*

#4

The finish

Bill Tindall, E.Tn.

The finish is one that is put on Period Mahogany pieces. It is the finish I have on the mahogany Wall Cabinet in my Gallery.

How did you shape the drawers? That part would have stumped me.

How did you profile the mirror frame?

Where is the finials come from?

Re: A good book and finally finished project *LINK*

#5

That's very nice Paul

Raymond in Trenton NJ

Very nice indeed. Like most things in life (and in people?), all things have flaws. My opinion; it's the small flaws make things 'real'. And that dressing mirror is real nice. As you had mentioned, I also hope it gave you some closure. Who knows why things take the time they do to finish?

I'm sure they are both happy with it.

Be well and thanks for sharing,

Raymond

Re: A good book and finally finished project *LINK*

#6

Re: A good book and finally finished project

John Jardin

Paul, that is a great piece and a testament to your fine craftsmanship.

Re: A good book and finally finished project *LINK*

#7

Re: The finish

Paul in NJ

I neglected to say anything about the top coat. It is semi-gloss varnish. The drawers were all shaped in one piece before being separated. I made saw cuts along the length with a hand rip saw and then roughed out with a large gouge. I followed with a hollow plane, custom scraper made from an old saw blade, and a little sandpaper to finish. The profile on the mirror frame is not the same as the book. I simplified it to an arc or really an ellipse. I used a round plane to shape the stock before mitering. After glue up the top corners were rounded with coping saw, spoke shave, and files. Finials came from Lee Valley Hardware as were the pulls. The finish on the finials was stripped with acetone and then fumed with household ammonia to "age" them.

regards,

Paul Dzioba

Re: A good book and finally finished project *LINK*

#8

Thanks everyone


Re: A good book and finally finished project *LINK*

#9

Re: The finish

Bill Tindall, E.Tn.

Thank you. Reading the description of drawer making I am even more impressed.

Re: A good book and finally finished project *LINK*

#10

Clint Searl

Beautiful