Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

New life for old chisels

Posts

New life for old chisels

#1

New life for old chisels

Svante Nilsson

Some 20 years ago I made with a great effort some chisels (and plane blades) of A2 steel. The intention was to have them for paring so they were sharpened to 25 deg.

As a lot of people have commented, A2 has poor edge retention at low angles so they they have sadly not been used so often.

Yesterday I tried to unicorn-sharpen them. Got a shiny nano bevel so hopefully they should be ok. Made some tests and they are sharp but it is too early to brag about the edge retention.


Re: New life for old chisels

#2

They'll like the unicorn...

David Weaver

...it covers up the lack of uniformity at the "fine edge" depth that A2 can have.

They'll be excellent choppers now - you'll like the conversion.

EDIT: I may be jumping the gun assuming they'll chop - they'll work well as parers now, too.

Re: New life for old chisels

#3

Re: They'll like the unicorn...

Bruce Mack

My LN adjustable mouth block plane loves the unicorn. Thanks, David.

Re: New life for old chisels

#4

it made....

David Weaver

...my stanley 18 plane with its cheese iron go from something that never moved to being something that I do actually use from time to time. The cheese irons always raised a wire edge and wore not-so-long.

Now, no wire edge and they seem to wear really well/long.