Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Unicorn Chisel Devours Stack of Drawer Dides

Posts

Unicorn Chisel Devours Stack of Drawer Dides

#1

Unicorn Chisel Devours Stack of Drawer Dides

Bill Tindall, E.Tn.


I am lowering the bevel angle and then Unicorning chisels as a need for their services comes up. I have 4 drawers to make. I considered lining the sides all up and driving the robust edge through the stack, cleaning out dovetail waste with a single stroke ;)


Part of another stack of drawer parts was resawed from some billets of poplar I whacked out with a chain saw from a large tree given to my daughter for firewood. I put spacers between the resawed boards and add clamps to each corner. Then a trip to the attic for 2 week to bake. When dry I package them up by length and width for the next drawer needs. This is the 3rd run of these parts and near the end of what I have to resaw. The effort has provided rift and quartered stock, for no cost and a fair amount of effort.

Re: Unicorn Chisel Devours Stack of Drawer Dides

#2

Re: Unicorn Chisel Devours Stack of Drawer Dides

David Weaver

This would seemingly be the wrestling equivalent of a squash match (uni vs. poplar). :)

(squash match = one where a really strong contender throws around a little guy and the match ends quickly - a way to show how strong a certain wrestler or wrestlers are to give them credibility before facing bigger opponents).

We cut a lot of rounds when I was a kid (about 10 cords a year). I'd like to have some of that wood back to split or saw quartered stock out of. Our stove took 30" logs, and we cut it at 24 - much walnut, cherry and white oak was wasted. quartered cherry probably wouldn't look right as drawer sides but when it's hit right for the rays to show, it's super vivid.