Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

help re. Autosol posts

Posts

help re. Autosol posts

#1

help re. Autosol posts

Bruce Mack

Generational gap- I cannot successfully use Google site search to find recent posts on Autosol as a final sharpening medium. David has a 2016 post on Autosol ending "I think autosol is quite good, though - it will go well beyond the graded 3 micron size in honing if you put it on something and let it break in and only refresh it with a little stuff at a time (I couldn't tell the difference between MDF and autosol that is broken in a little bit and MDF with green chrome pigment only on it).

I would personally prefer to use autosol over the smaller particles due to its ability to "Break in" and then be refreshed on whatever it's on by just adding a little bit of oil to keep it mobile instead of adding more abrasive

FWIW, if I put autosol on MDF, I have to sharpen two or three chisels on it before it has that fineness. The first thing sharpened on it, it shows its teeth a little bit and about matches an 8k waterstone, as you'd expect."

I recall more recent info on this site or on one of David's videos and today used a just acquired tube on planed pine. Gritty to touch, it quickly produced a blackish green swarf on a few passes of a dull but not damaged chisel. I expected a rough edge but realized I had an Excalibur in my hand with a shiny edge. I want to read more about this if someone can reference the date(s) of recent discussion. Thanks.

Re: help re. Autosol posts

#2

Re: help re. Autosol posts

Steve Voigt

It's in Dave's omnibus sharpening stone thread and was posted on 8/16.

Re: help re. Autosol posts

#3

Re: help re. Autosol posts

Bruce Mack

Ahhh....Thank you.

Re: help re. Autosol posts

#4

Altered states

Bruce Mack

Losers- all my Sharpton stones, sharpening guides (4 at least), leather strops.

Keepers- DeWalt grinder, CBN wheel, iron plates and diamond paste of varying grits, buffing wheels, tube of Autosol.

So much has changed for me.

Re: help re. Autosol posts

#5

Re: help re. Autosol posts

David Weaver

I posted a response to this earlier and must've forgotten to press send.

Originally, I knew that autosol was about 3 micron alumina. Depending on where you use it and how, it can seem about like an 8k waterstone, but it becomes very easy to manipulate it on substrates to go much finer.

I thought maybe it was an alumina that breaks down, but I think it's more realistic to suppose that it embeds in a soft substrate and then cuts more finely.

More or less put a pea sized amount on some substrate with give and then use it until it doesn't seem fast enough, and then add just a little to keep going. Often when it seems caked, a drop of oil brings it back to life. Very easily manipulated, and very fast if you want it to be.

The only thing it has against it is that it intentionally leaves a protective film on tools (like chisel backs) that you might have to wipe off if you're paring something that will be visible (the film inevitably contains some of the abraded metal and leaves a light black stain on the first things you chisel or pare).

A light oiled cloth would probably wipe off the dark stuff easily.