Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Another (not) ruler trick

Posts

Another (not) ruler trick

#1

Another (not) ruler trick

Mike In Los Angeles

If you have a scraper fixed at 90*, it helps to draw a 45* burr. Here’s a cheat using stuff you have lying around. Burnishing blade is rounded off and buffed out a little.

Just to say it:

There’s better ways probably

People have likely been doing this for centuries

You should be able to do it by hand

Scraping is unnecessary anyways if you’re good

63-AF3-ED9-4969-4-A11-BE07-7-D87513987-AE

C8-EF1-F2-C-853-D-479-B-B6-D9-6-D81424-EB99-B A653-D561-8158-4839-A15-A-B99-C206-CC8-FC

C8-EF1-F2-C-853-D-479-B-B6-D9-6-D81424-EB99-B

Re: Another (not) ruler trick

#2

Re: Another (not) ruler trick

David Weaver

this looks like cannibalism!!

Re: Another (not) ruler trick

#3

Re: Another (not) ruler trick

Mike In Los Angeles

No center finder heads were harmed!! Ready to go back in the drawer full of extra shit at a moments notice!

Re: Another (not) ruler trick

#4

Re: Another (not) ruler trick

Mike In Los Angeles

Reminds me of an old joke:

What did the cannibal say to the needle mover?

Re: Another (not) ruler trick

#5

Re: Another (not) ruler trick

David Weaver

scratch the burr stuck on my back side? :)

Re: Another (not) ruler trick

#6

Re: Another (not) ruler trick

Mike In Los Angeles

That’s a better punchline, mine was gonna be how do you rabbet a binding channel in the waist of a guitar with hand tools?

Re: Another (not) ruler trick

#7

my experience so far is

David Weaver

hold a stanley #4 carefully in your left hand...

....and use the right hand to trim the channel with a trim router.

Re: Another (not) ruler trick

#8

Re: my experience so far is

Mike In Los Angeles

I figured you’d either say that or just chisel it like a grown up. Both scenarios problematic.

Re: Another (not) ruler trick

#9

Re: my experience so far is

Mike In Los Angeles

Off topic but a tweak you’d love is Babbitt bearing scrapers, for fairing a waist it’s good fun.

Re: Another (not) ruler trick

#10

Re: my experience so far is

David Weaver

I'll stuff that in my .txt file of things to try.

Thanks!