Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

microscope images

Posts

microscope images

#1

microscope images

kenneth hatch

How do you clean the bevel of your cutter so there is no gunk showing in the photo?

Re: microscope images

#2

Re: microscope images

Winston

First, I wipe the blade with a piece of paper towel. Then I swipe the end grain of a piece of wood across the edge of the blade. With a narrow piece of wood, it's easier to slice deeper into the end grain so that the wood cleans off more of the blade.

Re: microscope images

#3

ruin tshirts...

David Weaver

one wipe doesn't do it, sometimes five doesn't.

if you're photoing the back or bevel, make sure you keep your fingers away from the edge after wiping, and if you're wiping, make sure the opposite side of the blade or the tool edge doesn't have oil - if it does, you'll end up getting a little on whatever you're using to wipe and it literally will be enough to make the edge look like it's filthy with oil.

Re: microscope images

#4

Re: microscope images

kenneth hatch

Thanks guys, I'm new to microscopes.

ken