Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Another notch in the something or other..

Posts

Another notch in the something or other..

#1

Another notch in the something or other..

David Weaver

I think it's been well over a year since I've made a plane. This one is made completely without electricity or sandpaper. If you look closely at it (it'll get one final cleanup of unsightly bits once it's gotten linseed oil), you can see some areas that have been scraped (on the handle) instead of sanded, and so on, but the no sanding thing is just a fun gimmick to follow sometimes. The ends are planed and filed, as is the back curve (which presents a little bit of a challenge for uniformity without sandpaper.




Re: Another notch in the something or other..

#2

Re: Another notch in the something or other..

Wiley Horne

Really brilliant David!! In addition to the workmanship, I don’t know when I’ve seen such a block of beech—I count 32 rings or so. What’s the iron?

Wiley

Re: Another notch in the something or other..

#3

Re: Another notch in the something or other..

David Weaver

Thanks, Wiley. Vintage matching ward combo, 2 1/8th. The request is for something of a super smoother, so the iron is one of the harder ones.

This is the first "short" jack I've made. It looks even shorter because the recipient doesn't have little hands like me!

Re: Another notch in the something or other..

#4

Beautiful!

Jonathan Elliott

I noticed the handle looked large

Re: Another notch in the something or other..

#5

Re: Another notch in the something or other..

Steve Voigt

Looks great Dave. Very crisp work. The eye close up looks really good; ditto the wedge fit.

I'll be curious to know what you think of the "short jack" in use. That size is very much my favorite. I experimented with jacks in the 16"-17" range but found I preferred 15". I'm guessing yours is 14-15?

By coincidence I also finished a jack yesterday, 15" long as usual. First one I've done with the slightly redesigned tote we discussed a while back.




Re: Another notch in the something or other..

#6

Re: Another notch in the something or other..

Wiley Horne

Steve,

Fabulous!! What’s the iron on yours?

Wiley

Re: Another notch in the something or other..

#7

I enjoyed comparing backgrounds

Bill Tindall, E.Tn.

You guys make handsome planes........in different environments :)

Re: Another notch in the something or other..

#8

Re: Irons

Steve Voigt

Thanks Wiley. The irons are custom made by the very kind Rob Lee and co. The jack irons are 2" and taper from approximately 3/16" to 3/32". O1 steel. Cap irons are made in-house.

Re: Another notch in the something or other..

#9

15 inches...it's more comfortable....

David Weaver

...than I expected. I haven't measured exactly but it's more or less an inch off of each end of my favorite mathieson pattern.

I like that long jack so much (17") due to the fact that when you do the initial prep up to the last stroke with it, it's not too far off from flat to the try plane.

But where I expect this one to be stubby feeling or with something missing in the back for my hand to rest on, it's really not got any of those shortcomings.

The two planes look like they could be relatives!!

My plane has one apology. The handle is fitted for a 4" hand - it's just a bit tight for hammer striking, and there's probably enough room to push the front of the handle down but I've got all kinds of hang ups about handles and where fingers go and where they should be and shouldn't be missing.

Re: Another notch in the something or other..

#10

Re: Irons

Wiley Horne

Steve,

Do you ever add strike buttons to jack and longer bench planes?

Wiley

Re: Another notch in the something or other..

#11

Re: Irons

Steve Voigt

Hi Wiley,

Try planes always, jack planes on request. I've only had a handful of requests.

Re: Another notch in the something or other..

#12

I'm new to the meme community (video)

David Weaver

Steve may be more familiar with what the public wants (in terms of demonstrating that a plane is capable) - I want a plane that locks down and stops you in your tracks at a cap iron set. The tiny shavings are a given. Demonstrating a heavy smooth shaving on imgur results in advice in the comments about learning to sharpen or how to sharpen a finer edge. (Kids, you're talking about sharpening to the sammy the bull of sharpening things).

But I dumped a short picture trail in imgur (meme community doesn't want any 40 picture step by step) and got "Show us shavings!!".

The kind of wood show stuff that Rob Cosman does, I guess.

https://imgur.com/gallery/sMEM7MF

(Tiny video - not familiar with these platforms, but I guess they're set up for mobile devices. I'm never going to catch up).

Fairly sure that straightening out a shaving would be lost on the crowd there!!

This is straight off of an 80 grit lap, then about 4 minutes on a 1200 grit ezelap and finished quickly on a washita. I never much cared for shooting for perfection on the entire iron (and once further along - or now that I am - I forgo it and do a quick prep and subsequent sharpenings can finish the job).

This iron is super hard, too. With a certain technique, the back of a hard iron like this one will take something approaching a dull polish on broken in 80 grit sandpaper. I'll spare everyone here).

Re: Another notch in the something or other..

#13

Re: Nice!  Brand vendor?....

John Aniano in central NJ

David and maybe Steve V.,

Beautiful work. Very clean looking. Nice!

Wondering if you (both?) could let us know the vendor who supplied your zigzag edged brand? Can we get a better look at your brand impression? And maybe the brand itself?

Thanks,

John

Re: Another notch in the something or other..

#14

Re: Nice!  Brand vendor?....

David Weaver

I used reverse letters for mine (in brass) and filed notches in it before George Wilson let me know that historically, they didn't look uneven like mine does. I'd thought at the time that I would make a few of these to come up with one that was good, but for some reason, that never happened.

I ground an allen key down to a small line to put serifs on the letters.


Re: Another notch in the something or other..

#15

Re: Nice!  Brand vendor?....

Steve Voigt

Hey John,

My stamp was made by Peter Ross. You can email him and he'll make you one.

My first stamp was by Mazzaglia tools. Works well but the font is pretty plain and modern. Then I got an English guy to make one…three unsatisfactory stamps later, I paid him for the last one just to be shot of him. Peter's looks very nice, but I would like to get one with deeper imprints. The image below is one solid hit with a 5 lb hammer, and it's as deep as I can get. I've heard (and seen) good things about Infinity stamps in L.A.

There…probably more than you wanted to know!