Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

What is this off?

Posts

What is this off?

#1

What is this off?

ken ca

I wanted a pair of Stanley 59s, the old and the newer type. Got those and a number of guides. Also, included was this "clamp" which is similar to but the the same as the clamps used on the older 59s. Anyone know WHAT this is off? I'd say clearly a stanley part, but other than that?


img

Re: What is this off?

#3

Re: What is this off?

ken ca

I shall have to try it!

thanks.

ken

Re: What is this off?

#6

Re: Look up Stanley No. 49 Bit Gauge

Frank S

Mmm, I dunno. Doesn't look like a #49 on my browser. Looks like a guide clamp for a Stanley No. 60 dowel jig to me. But that would mean it's older than I am and I've been wrong before.

Re: What is this off?

#7

Re: Look up Stanley No. 49 Bit Gauge

Derek Cohen (in Perth, Australia)

Frank, I think that you need to look UNDER the dowel jigs, which is what Ken was referring to ("Also, included was this "clamp" ) ....

I've added a red arrow to help you find it :D :D


Regards from Perth

Derek

Re: What is this off?

#9

Re: Look up Stanley No. 49 Bit Gauge

John in NM

Man... I'm not seeing it at all. The photo of your part is similar, but its clearly not the part Derek is talking about.

Re: What is this off?

#10

Here is a demonstration of it in use

Derek Cohen (in Perth, Australia)

Mark, this is the Stanley #59 doweling jig ...


This is a set of Russell Jennings auger bits ...


This is a Stanley #49 depth stop ...


Here is the #49 on an auger bit ...


... and inserted into the dowelling jig to drill to a depth for a dowel ...


It bottoms out ...


... and the result ....


:)

Regards from Perth

Derek

Re: What is this off?

#11

Re: Here is a demonstration of it in use

Wiley Horne

Derek,

That is a tour de force for sure! Thanks, I never heard of either of these items, so I’m in awe of those who know them!

Here is a listing on Etsy, of a Stanley 59 w/original box. Is the part to the lower left indeed part of the Stanley 59? Only you would know for sure!

https://www.etsy.com/listing/772199100/stanley-no-59-vintage-dowel-jig-wbox?gpla=1&gao=1&&utm_source=google&utm_medium=cpc&utm_campaign=shopping_us_a-art_and_collectibles-collectibles-memorabilia-other&utm_custom1=0af4e01f-4a67-446a-a0d6-94c33d2be4b1&utm_content=go_1730308301_67816387575_337556716488_pla-314954652373_c__772199100&utm_custom2=1730308301&gclid=CjwKCAjwv4_1BRAhEiwAtMDLslB5oRY7Jg0RWA5A-U54b3osVf7D6YV1F-8FXlUxnRGO1DSDdNnE-BoCoFoQAvD_BwE

Wiley

Re: What is this off?

#12

Re: Here is a demonstration of it in use

Mark Nowicki

Hiding behind boxes, I see.

You win this round, Derek, but only because you are 12 hours ahead so you had more time to waste.. :-) :b

Re: What is this off?

#13

Re: Here is a demonstration of it in use

wallyb

Derek,

Look at the original photos again. Look at the part that you are calling a bit stop gage. It has a wire clamp shaped like a finger on a trigger. Now look at the jig on the left and in the center. Same part, don't you agree?

I assume the two on the left are earlier. The one on the right is later and uses a simpler thumb screw that is undoubtedly cheaper to manufacture.

In Walters book he does not mention if the earlier one came with two clamps to accommodate the different bushing diameters. Perhaps the OP can remove one from the earlier example jig and compare.

Also, the bit stop that came with the jig is a simple hollow barrel shape with a set screw.

Re: What is this off?

#14

Re: Here is a demonstration of it in use

Derek Cohen (in Perth, Australia)

Look at the original photos again. Look at the part that you are calling a bit stop gage. It has a wire clamp shaped like a finger on a trigger. Now look at the jig on the left and in the center. Same part, don't you agree?

I assume the two on the left are earlier. The one on the right is later and uses a simpler thumb screw that is undoubtedly cheaper to manufacture.

Wally, we are discussing two quite different items, I fear. You are discussing the three jigs at the rear, two of which are clearly marked “No59”. These are dowelling jigs. I have commented on what I believe Ken was focussed on, the object in front of the centre dowel jig. I have seen different versions, but the one I have is definitely used as a depth stop. As I said ... and where we are talking at crossed purposes ... we are looking at different items in the original photo.

Regards from Perth

Derek

Re: What is this off?

#15

Re: Here is a demonstration of it in use

ken ca

Derek is 100% correct. I found the literature for the earlier #59 and it clearly states that it's a depth gauge. I've tried it, and it works although I will be sticking with masking tape as I am more often likely to use twist bits - sometimes I will use a brace and then I will use it.

I couldn't resist this job lot of three #59s on ebay, and can at least dedicate each one to a different dowel size (yes, I know, a poor excuse for buying too many tools.

I had to make a 3/8 guide tube as that size was missing (got three "useful" 7/16 tubes though!)

Re: What is this off?

#16

Re: Here is a demonstration of it in use

AlanWS

Derek:

No. He is referring to the part your red arrows point to. A Stanley bit gauge is a useful thing, but the red arrows do not point to one. It does look like the clamp from a doweling jig to me too.

Re: What is this off?

#17

Really? *LINK*

Clifton C

I thought he was referring to the clamp the red arrows were pointing to...


K for Klamp...

Re: What is this off?

#18

Re: Really?

Frank S

Okay, thanks for the link to the diagram. I see what Derek is referring to now.

Frank