Kind of a mashup of obsolete styles of saws. I spent zero dollars making this. Finished tuning and filing it a few minutes ago. So far I like it. the plate is from a worn out George Bishop crosscut. the handle is patterned after an Atkins keyhole saw. the wood is from my scrap pile. the nuts are from the bottom of my saw parts drawer (no idea...) kind of like a dovetail saw except for no back, and about 10 tpi, and a thick plate, and a low hang angle, and filed crosscut. I gave it a low rake to go with the low hang angle. It seems to saw well enough
The teeth were there, but i made some changes. The existing teeth were in pretty rough shape and I wanted a lower rake angle with plenty of fleam. I did a quick jointing off of the tips and a couple of passes reshaping. I'll probably do more later.
That was one of the saws that inspired this. Can't find it now- my ability to search within woodcentral is embarrasingly weak. Anyone better at searching than me care to post a link?
Thanks for that, Wiley. A pretty thing, in that illustration though I suspect that the illustrator got a little carried away with the curly horns on that handle.