Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Finishing up the berries

Posts

Finishing up the berries

#1

Finishing up the berries

Bill Tindall, E.Tn.

I am proud of the invention shown in the picture. It is a template for making centers of the berry clusters. I prepared it by scratching 3 near tangent circles on clear plastic with a divider.



Berries look best when their position relative to one another in the cluster is not rigidly uniform. On the other hand deciding where to locate the centers for drilling is difficult if done with no guidance. I invented the template to aid this step. The template is positioned at the end of the string segments to achieve an attractive orientation of the cluster and the centers pricked with the tool in the picture.

When it comes time to drill the holes with a spur bit I purposely locate the tip slightly off-center of the hole for some centers. Because of potential overlap one berry hole at a time is drilled and its berry installed before drilling the next hole



The berries are glued in and the whole affair planed smooth.

Re: Finishing up the berries

#2

Re: Finishing up the berries

William Duffield

That's a funny looking tote on your 605. User made?

Re: Finishing up the berries

#3

Funny?

Bill Tindall, E.Tn.

I'm offended :)

I bought it back in the day when old hand planes were selling for big bucks. It was without handle and other problems, but still not cheap. Had friend in machine shop flat grind the bottom. I went through several planes of different sizes makes and models thinking I needed a heavier plane, shorter plane, higher angle plane, etc. What I really needed was Kees and Weaver to show the way with hand planes. This one won the day. It just feels right.

If someone had told me even two years ago that I should hand plane a drawer face with this much work in it I would have chased them out of the shop. Thank you David.

I dashed out a handle to get it useable. Like much else I never returned to make a better one. So much to learn; so much to make. Good enough becomes the end of the journey.

Re: Finishing up the berries

#4

Re: Funny?

William Duffield

Sorry, not funny; unusual. But definitely good enough. It looks like you made it comfortable in all the important places. I just though it would be educational to point it out, because many people here would otherwise never have noticed that you had made it.

I've got lots of homemade or modified tools in my shop that I got to the point of asking "Lets see if this works?" before I wasted any more time on it. When it did, I went on to something else instead of reworking the cosmetic problems, or remaking it more complicated than it needed to be.

Re: Finishing up the berries

#5

Re: Finishing up the berries

Wiley Horne

Really bright, crisp, and beautiful Bill! I have a brother to your 605, including the Veritas iron, and find it a perfect thing of its kind. Reach for it before the larger and heavier LN5-1/2.

Thanks for showing!

Wiley

Re: Finishing up the berries

#6

Been there and done that

Bill Tindall, E.Tn.

I got so much useless advice along the way. I was convinced to buy a LN 5 1/2. It was the plane to use for woodworking. Fortunately I was buying LN wholesale at the time so it was not like I lost money. But it sat unused after I found that a lighter weight plane was more nimble to use. I never got on with the #4 either. I do use it rarely when a short footprint is essential.

Re: Finishing up the berries

#8

Jack Guzman from Maine

totes

Jack Guzman from Maine

Bill, I worked out a good method for making stanley type plane totes years ago. I posted it here but I don't think it ever made it to articles.