Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Some of George's Old Work

Posts

Some of George's Old Work

#1

Some of George's Old Work

David Weaver

It's not too often that George's work shows up online. There are a few examples, and I've been browsing online off and on for years in an attempt to find an unknowing seller unloading one of his flat top acoustic guitars. No luck.

At any rate, elderly instruments turned up something of George's from his days in the instrument shop at williamsburg.

It's not particularly fancy by fine work standards (though the peghead is, and the rosette is 3d instead of just an arranged rosette cut to fit a pre-made slot and dropped in).

https://www.elderly.com/products/george-wilson

I have no idea what one would play on a guitar like this, or I wouldn't post this until after I bought it. It's incredibly cheap.

Re: Some of George's Old Work

#2

or was....

David Weaver

Or was incredibly cheap. It appears to have sold.

Re: Some of George's Old Work

#3

The reason this guitar went out of stock...

David Weaver

...so quickly is because I bought it.

I have some of george's work if you nail me down to it (some lever cap screws, a roughed lever cap), but I never wanted to badger george for a guitar, nor did I really want to pay what he charges (which is perfectly fair if you're a buyer of boutique guitars - I just am into making them now).

I thought it would be interesting to faff with something different. I expected an odd sounding little guitar that was kind of shallow and anemic, and the only thing that's true is that the guitar is small and odd.

It is made fantastically well, cypress (quartered) in strips with mahogany between and some kind of tape over the joints on the inside of the guitar. It's very light, has a very thin french polish, is still straight and is extremely loud for its size with much more bass than I expected.

George remembered a little bit about it. The pegs are some kind of boxwood-ish type wood from mexico or central america and george mentioned that while he was at CW, he built an auto-lathe that could run in the background and automatically make one of these pegs in 20 minutes. Including cutting the button flat. What I'd assumed would be a gadget guitar turns out to be completely enjoyable to play, and the construction is a good lesson in what you can do if you have the means and aren't tied to industrial process.

I talk to george fairly often. He didn't remember this guitar at first as they made them in quantity at CW, but then he at least remembered the type and filled in the blanks. He asked if it had his label in it, and I said "yes". He said the price in 1977 from the museum was about the same nominally as the price now, the 6 strings are not historically accurate, but nobody would buy the guitar with (i think it was 5) pairs of strings as they were historically, because nobody would know how to play it. I told him what they asked for the price, and he sent me a text that said "SUCKER!!".

i told him I thought the price was low, and that the guy at elderly told me only the ones made by marcus are really worth anything. :b

(of course, nobody said that at elderly music :) )

Re: Some of George's Old Work

#4

Re: The reason this guitar went out of stock...

Derek Cohen (in Perth, Australia)

Nice work on getting the guitar, Dave. I would love to have something made by George. I’m very fond of him. Give him my regards (send me his email address, please).

Regards from Perth

Derek

Re: Some of George's Old Work

#5

That seems a very reasonable price to me.

Chuck Nickerson

Especially given your connection with George.

Since ukuleles are on my project list this year, I'm intrigued by the 3-D rosette.

Are those particular to any particular style/lineage of guitars?

Re: Some of George's Old Work

#6

Have you seen the guitar ad?

Bill Tindall, E.Tn.

It is for some drug- who pays attention- and as usual as they are warning that one of the side effects is that your toes, or whatever, will fall off. The actor cured by this wonder is sanding a guitar. He is making too-short awkward passes with the grain when suddenly he quickens the pace and sands across the face to the other side.

In the next scene his is proudly presenting the instrument to a grandchild? . The surface is not revealed in the scene, just the happy faces.

Re: Some of George's Old Work

#7

Re: forgot to reply to this!!

David Weaver

I haven't seen the commercial, but there's an intersection almost between the drug makers and the small boutique makers. The videos are fluff.

I saw a video last week of a boutique guitar maker making a $6000 les paul copy (well, plus whatever options were in the guitar). The guitar is obviously CNC carved, but the guy is standing in a near empty shop with a drill press behind him and he's sanding it.

There must be a commercial or ad agency person who just loves sanding because they know what it is. I suppose realistic scenes aren't fun for commercials (like the person in yours waving off a grandkid because they have side effects that make them irritable, or the boutique guitar guy buying nearly completed parts from the CNC shop that's carving the tops for him for a low price).

This was a dandy from years ago (I know you don't watch videos, but I'll summarize). It was an "amish electric heater" that they drone on about in the infomercial. They show some "amish" people (who somehow don't have a problem with cameras) pushing a plane across finished pieces and then doing other malarkey in the background in a supposed amish factory (it's a barn, and what's going on in the background is bizarre...but they forgot to sand as far as the few parts i watched).

https://www.youtube.com/watch?v=IhnAH3JUKdE

Re: Some of George's Old Work

#8

I'll have to ask george...

David Weaver

..about the 3d rosette. It's just simply little blocks in the groove where the rosette would be. A small touch, but interesting compared to the often-purchased and inlaid complete rosettes.

I'm going to hazard a guess that before ebay had complete rosettes inexpensively, it was probably easier to cut a bunch of identical blocks to the proper size and glue them in where the rosette would be.

But I'll ask George.