side snipe
ken ca
Can someone please explain to me when and how a side snipe plane would be used? Looks similar to a side rabbet but.....
Knowledge You Can Build On — Est. 1998
side snipe
ken ca
Can someone please explain to me when and how a side snipe plane would be used? Looks similar to a side rabbet but.....
Re: side snipe
Warren in Lancaster, PA
A side snipesbill is similar to a side rabbet in that they have a cutter on side of the plane that cuts on a vertical wall. A side rabbet can be used to widen a groove or clean up the side of a groove. However a quirk (a V shaped groove with one side a vertical wall and the other rounded) is too narrow for a side rabbet plane. It can be worked with a side snipesbill since its point allows it to get into the quirk.
These planes were on my list to buy forty years ago, but though I have made thousands of mouldings, I have not felt the need for them. The Seaton chest inventory (1796) has about seventy planes, including a pair of snipebills and a pair of side rabbets, but no side snipebills.
Rabbet planes, skew rabbets, side rabbets, sinking snipesbills, and side snipesbills are discussed by Nicholson (1812).
Re: side snipe
ken ca
Thanks for the detailed explanation warren.
Busy sifting through the wooden plane books I bought a couple decades ago - Roberts, Goodman etc. Will have to look for the Nicholson one you mentioned.
Great response; Nicholson reprint *LINK*
Wiley Horne
Warren’s reference to Nicholson:
Wiley
Nicholson reprint
Re: Great response; Nicholson reprint *LINK*
David Bassett
Megan Fitzpatrick has also printed a reprint. (Cleaned up scan of an original from 1845.)
(I just checked and LV carries this edition too.)
https://rudemechanicalspress.com/collections/books-apparel/products/the-mechanics-companion-by-peter-nicholson
Re: Side snipes and rabbets
Steve Voigt
That Rude Mechanicals reprint is nice to have, much nicer than trying to read through the free internet version.
Larry and Don made prototypes of both side snipes and side rabbets a couple years ago. Don posted a short clip on Instagram: