Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Chess Piece Attempt 1

Posts

Chess Piece Attempt 1

#1

Chess Piece Attempt 1

David Weaver

...while terrible at turning.

Sketching out designs for a pawn, and strangely enough, this looks decent in person, but in pictures, I can see things that need improvement.

https://imgur.com/gallery/EkJZTpf

Making a set of chess pieces is a good opportunity to get much better with a skew.

Re: Chess Piece Attempt 1

#2

Re: Chess Piece Attempt 1

rum

Looks pretty decent to me!

Are you planning to weight the bottoms? I've pondered the "best" strategy for doing that, one theory would be to pre-drill the pieces and use an expansion chuck while turning them.. but that seems perhaps overly slow so I think there must be a better way?

Re: Chess Piece Attempt 1

#4

Re: Chess Piece Attempt 1

david weaver

i haven't come to many final decisions about anything yet. Hashing out the pawn design, but the other pieces will be more difficult because the pip on the top of the queen isn't something that can be turned between centers. I lack most of the skills that go beyond just turning between centers and don't want to get too far into buying chucks, etc (I have a couple of decent chinese chucks that would be fine for this if I make the effort to turn a mandrel base and drill it properly on the lathe - that's hypothetical at this point)

I'm not a good carver, either, so the knight will be a good learning experience. We'll see.

As far as the weights go, I've done so much oddball stuff with small tools in hand that I'm just going to drill them freehand after turning.

William mentioned using a mandrel (something i haven't made yet) and in that case, there's already something to insert a weight into. Felt on the bottoms will cover up the evidence.

Re: Chess Piece Attempt 1

#5

Re: Chess Piece Attempt 1

rum

Yeah a short screw chuck/mandrel might well be the easiest thing. Pour in some low temp pewter or lead shot in epoxy afterwards and it's good to go. I might two part step drill it so that you have a (very) slight recess for the felt so its partially hidden..

Turning a piece just to size is imho a lot harder than just turning a piece and doubly so when the piece of wood is exactly the right length already. Certainly an interesting challenge :)

Re: Chess Piece Attempt 1

#6

Re: Chess Piece Attempt 1

William Duffield

What I want to see him turn is 15 more pawns just like that one. :D

Re: Chess Piece Attempt 1

#7

Re: Chess Piece Attempt 1

david weaver

That part will be more difficult. I'm such a deliberate afraid person, though, that I want to see the pawn 50 times to decide what to change before making the next several.

What you won't know is if I have to turn 50 to get 15 good ones, then you'll see the 15 good ones.

The collar under the head will be a little smaller, but other than that, I'm not seeing a need for too many other changes. Actual height is about two inches. A small bead at the bottom might be nice, but I'm dealing with limited skills and would like to keep the making to limited tools - almost all skew work. I need to be far better with it, anyway, and it's easy to sharpen.