Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Cleaning off some surface rust

Posts

Cleaning off some surface rust

#1

Cleaning off some surface rust

Joe in a Cleveland suburb

My brother gave me these planes last year. Not sure I want to use them as they are made for the weird right handed people and I am a normal left handed person :b

I don't like spending time rehabbing old tools but I thought I'd clean them up and give them a try. What are some suggested methods of cleaning off the surface rust?

Thanks in advance.

#1


#2


#3


Re: Cleaning off some surface rust

#2

Re: Cleaning off some surface rust

Don Goodwin

I had success several years ago on a couple of old user planes soaking the planes in a solution of citric acid and water (yes, water). I disassembled the planes and set the wood parts aside. IIRC, the soak was for about 30 minutes followed by a scotchbrite pad and a soft brass bristle brush. Rinse in water, dry immediately and wipe with a light oil (3-in-1?). I had them out tonight and they still were rust free. I'm not sure that I would use this for a collector plane. Hopefully others will weigh in.

Re: Cleaning off some surface rust

#3

Re: Cleaning off some surface rust

Don Goodwin

PS, I'm a lefty too and have had to learn to use certain planes with the wrong hand.

Re: Cleaning off some surface rust

#4

Jack Guzman from Maine

Re: Cleaning off some surface rust *LINK*

Jack Guzman from Maine

Electrolysis is my main method for removing rust from old tools. Read up on the process in the articles.


removing rust with electrolysis.

Re: Cleaning off some surface rust

#5

Re: Cleaning off some surface rust

Tom Norton

As a right-hander living in Chardon maybe they should come here to live!

Re: Cleaning off some surface rust

#6

Re: Cleaning off some surface rust

david weaver

I've done most of the common methods for rust removal. On something like the 45, I would brush phosphor concrete edge (just phosphoric acid) on a couple of times, rinse it off and work a toothbrush or something over the end result with autosol on it to remove any dullness (there may not be any on nickel plate), and then oil.

If I were going to use it instead, sometimes it's nice to just oil the rust on it and use it unless there's a functional issue.