Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Hand tool work in the state parks? *LINK*

Posts

Hand tool work in the state parks? *LINK*

#1

Hand tool work in the state parks? *LINK*

Bill Houghton, Sebastopol, CA

We're just back from a week at Calaveras Big Trees State Park, in California's Gold Country (link below, for those who want to see some nice, accessible, stands of Sequoia redwoods). The picnic table at our site had a very obvious recent "repair" on one of the benches: one edge had a bevel about a foot long, fading in and out of the weathered surfaces, where, it was quite clear, the wood had splintered and been smoothed off. The work was nicely done, and clearly not done with power tools. Looking at the bevels and other features of the surfaces, I thought I saw drawknife work, and quality drawknife work at that. Certainly not a power tool.

I was tempted to track down the maintenance staff to ask if that's what they had used for the repair, but it would have generated a serious case of eye-rolling on my bride's part.

There were bears in the park - two of our neighbors suffered from chewed up tablecloths, apparently from food residue on the tablecloths - so I suppose it could have been bear-claw smoothing, but probably not.


img

http://parks.ca.gov/?page_id=551

Re: Hand tool work in the state parks? *LINK*

#2

Re: Hand tool work in the state parks?

John in NM

Several years ago there was an opportunity for a joiner in Big Bend Park, mostly hand tool as I recall. They wanted someone capable of period consistent work for some 19th century vintage buildings.

Re: Hand tool work in the state parks? *LINK*

#3

Re: Hand tool work in the state parks?

david weaver

Not sure about the state parks, but I'm sure that you've seen the substantial amount of literature and educational material that the national parks put out teaching about the use and care of hand tools (especially with respect to axes and saws).

Many state parks around here are still a refuge from encroaching electrical everything and, of course, the national parks have some of the last remaining non-running bathrooms that I've seen (that are intended for high volume).

With lack of power, I wouldn't be surprised if there is some staff that's seriously good with hand tools and less enthusiastic about them than we are. My grandfather was a machine with an axe, chain saw (that doesn't count, but nobody in my lifetime was in the woods just with an axe) and a maul. He appreciated the tools to some extent, but valued the finished product more. In his later years, his favorite splitting axe splintered a handle one too many times and he fixed it by welding a solid steel handle into it. It was unforgiving to use....

Re: Hand tool work in the state parks? *LINK*

#4

Home-made Estwing axe...

Bill Houghton, Sebastopol, CA

Wow. That would have been hard on the shoulders! I suppose you could learn to release just before impact, so the shock didn't transfer much, but still...

Re: Hand tool work in the state parks? *LINK*

#5

Re: Home-made Estwing axe...

david weaver

Different kind of guy. Not much into comfort and grew up in the depression. Comfort to him was breaking a sweat because I think it drove off anxiety that he learned during the depression and through the early years of paying off farm loans "living on nothing" (as my grandmother put it - she wasn't fond of his habits or his hardness).

My dad grew up on nothing, too, but thought my grandfather was crazy. I don't know what happened with all of his stuff, but I wouldn't mind having his steel handled axe.