Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

v11 oilstone edge

Posts

v11 oilstone edge

#1

v11 oilstone edge

david weaver

some of the edge looks like this after sharpening freehand on oilstones


and some has small defects like this, and some a little worse. not sure if the blade gave those spots up to the strop or a contaminant on the stone (the latter is possible and i'll give it one more go before seeing how long the edge lasts)


cycle time to sharpen this way off of the grinder is about two minutes.