Metrology for the cabinetmaker
Brian Holcombe
I fully expect most to think I've launched into orbit, but I put this post together and hopefully some find it useful.
https://brianholcombewoodworker.com/metrology-for-the-cabinetmaker-introduction/
Knowledge You Can Build On — Est. 1998
Metrology for the cabinetmaker
Brian Holcombe
I fully expect most to think I've launched into orbit, but I put this post together and hopefully some find it useful.
https://brianholcombewoodworker.com/metrology-for-the-cabinetmaker-introduction/
Expectation met
Re: Metrology for the cabinetmaker
Bill Tindall, E.Tn.
"The reader may wonder as to why fine measurements make any difference at all in a wood shop." Only those that never fit a slide together joint will wonder- M&T, dovetail, etc.
Well Done, Brian!
Brad Chenoweth
As a part-time woodworker who has spent the last 42 years in his day job as a machinist, quality assurance technician and process engineer, I can say that you did an excellent job with this post. This is as good a basic course in metrology as I've ever seen! I've used my machinist's tools for years in my woodworking endeavors, particularly machine set-up. It might seem like overkill to some, but I find it helpful to me.
Brad Chenoweth
Re: Metrology for the cabinetmaker
Brian Holcombe
Totally, I made up some 38" wide sliding dovetails last week, that was nerve wracking and safe to say I'm glad I had my calipers.
Re: Well Done, Brian!
Brian Holcombe
Thank you, Brad! Very much appreciate your comment!
Oh wow
Jonathan Elliott
Thanks for the effort in this Brian! Extremely useful information, very much appreciated
Way..
david weaver
..above my pay grade and so much more academic than my typical method of mark it and cut it close and then fix it on the fly.
Thank you!
Re: Way..
Brian Holcombe
Hah!
Producing batches of chairs is what brings one to this spot. My first batch of four chairs was in hard maple and took so damned long I had to start bringing my machine shop experience to play. I needed to make parts much more quickly so that I could afford myself the time to put the handwork in where it matters most.
Re: Metrology for the cabinetmaker
Philip Duffy
Wonderful authorship and so very useful in broadening the understanding of the tools in our shops. Brian has done the world a big favor and we all need to be grateful. Thank you, kind sir. P.
And now I know the difference between
Chuck Nickerson
metrology and meteorology. Well done!
You're more likely to get with from meteorology
Thank you, both!
Re: Metrology for the cabinetmaker
Kees
As you posted this in the handtool forum, I would say the word overkill is an understatement. 