Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

strangest thing you've planed?

Posts

strangest thing you've planed?

#1

strangest thing you've planed?

david weaver

I spent part of the day yesterday fabricating another corian-type (livingstone, different brand) countertop for an add-on cabinet that the mrs. wants.

I don't have the pictures on my phone at this point, but anyone who has ever made a corian countertop, this isn't like smooth planing wood (the face of the counter top is already polished, you just sand and then polish - if you desire - the final product).

But, the planing comes in because the process of making the countertop involves building an edge that's 1 1/2 inches thick when the surface material itself is only 1/2 inch. That means a trick glue that mixes in an applicator (perhaps the most useful glue product I have ever seen short of hide glue on wood - it is really spectacular and dries to an invisible line so that the three layers of countertop look like one), but it's slick like anything else clamped in a two part glue and you end up with some unevenness to plane off.

Most people would rout or CNC it, and I will rout or saw it if the waste is big enough, but I plane normal undulations, check for square and then sand it as it has little conviction to itself and the surface is just less than perfect when planing it as it sort of fractures off.

It is hard on a plane, but will plane with anything - not hard in the sense of being abusive, just accelerated wear. When I can track down the pictures, I"ll post them.

Anything less than commercial dust collection and the tiny feathers of corian that come off with a router bit are just horrid - they stick to everything and they have a static charge. Even if 10% of them escape a vacuum, you have flying snow that sticks to everything around. And I always have a bite of some sort on a router that I end up needing to plane out, anyway.

That's probably the strangest thing I've planed. The second strangest is MDF (my router table when I had one was MDF - it needed to be planed twice before it stopped expanding and becoming uneven. I wasn't aware at the time that you're "not supposed to plane it, and still think planing it is a good idea if you're willing to sharpen your iron a couple of times. like corian, it's abrasive, but it doesn't really damage an iron, just wears the edge and resharpening is easy).

Re: strangest thing you've planed?

#2

Jack Guzman from Maine

PVC house trim

Jack Guzman from Maine

Just before I retired from carpentry I was introduced to the wonders of PVC trim. A little pricey but it doesn't rot and it paints just like wood. Anyhow,I discovered that this stuff is easy to trim with a block plane.

Re: strangest thing you've planed?

#3

Re: strangest thing you've planed?

John Schtroumpf

Besides accidentally a little of my jack rabbet's sole. These place card holders aren't mine, but I did the same thing with birch logs for my daughter's friend's wedding. I planed the bottoms of the logs flat, so they didn't roll.


Re: strangest thing you've planed?

#4

Aluminum

John in NM

I once put a small chamfer on an aluminum part with a block plane. Works fine when one isn't afraid of having to sharpen!

Re: strangest thing you've planed?

#5

Pictures

David Weaver

One with a cocobolo smoother cleaning up the edge of a piece that trims the far side of the cabinet to look full thickness (basically jointing an edge).


Then one cleaning up the built edge (I guess jointing again). A stanley 4 and a chinese HSS iron (these are pretty good irons for $10). Not a great deal of difference in edge life for the IH sorby iron vs. the HSS chinese iron. Sharpen often no matter what.


And the cabinet skeleton. It would've looked nicer to fair a bit of a gradual curve over the entire diagonal on the end, but I just ran out of steam and rounded the corner with planemaking tools. The former would've required a router template and I gave up due to desire to finish. The top and bottom did receive a radius after this, though. It's a nice material to work with.


The end is funny because there is a cutout in the back that directs ducted air down and out from under the cabinet. The last three or so feet on the right are closed off from that and will get a normal toe kick. Three doors and a garbage can/recyclable drawer on the far right. The mrs wanted a cabinet that would be easy to get big things in and out of, thus door on the diagonal end.

Not my finest work!

Re: strangest thing you've planed?

#6

Cheese

Frank D. in Montreal

Raclette for 75 people and no mandoline slicer. Shavings were intentionally thick, used a jack plane, they melted fine.

Re: strangest thing you've planed?

#7

nice!


Re: strangest thing you've planed?

#8

Strangest thing planed? Sterling Silver & Gold

John Aniano in Central NJ

When I mate a musical instrument bow stick to its ebony frog, the latter is lined with an 0.008" thick annealled sterling silver underslide. I plane the stick, ebony and silver together to make a uniform face on both sides of the bow. I'm basically planing the edge of the silver with my high angle scraping planes. I finish all with files and SiC sandpaper from 400 to 2500 grit.

For gold mounted bows, the underslide is 14 or 18kt annealed gold and it is planed just like the silver.

I've also planed aluminum, but John in NM already beat me to that one!

Re: strangest thing you've planed?

#9

Re: Strangest thing planed? Sterling Silver & Gold

david weaver

I'll note that!!

the first time I tried to trim the wood to brass fit with a carbon steel chisel (the fit on an infill plane), I learned a lesson on what very hard carbon steel won't tolerate (a lesson that I expected to learn), blunted the edge some and finished the job.

The next time I did the job, I'd gotten an HSS japanese chisel and it still took some damage, but about a tenth as much. Never ventured in to planing much metal after that due to the experience with the chisel, but am glad to see your responses and others and may yet make some tools to trim those transitions on infill planes without using a chisel (that type of scraping without using a plane results in ripples that need to be filed or sanded to smoothness).

Re: strangest thing you've planed?

#10

Re: Strangest thing planed? Sterling Silver & Gold

John in NM

Brass is vastly harder than aluminum for a steel blade. I would re-grind a relatively soft blade to a high angle if I were doing that regularly. If using a chisel, this is a perfect use for one of those horrible blue Marples :D

The 18K gold John mentioned must have been almost like planing lead! That's pretty cool, but I think the cheese still wins the day :D Now we need a thread discussing bevel up or bevel down for cheese. Proper angle to cut some of the more difficult soft cheeses without excessive tear out.... :D

Re: strangest thing you've planed?

#11

Cheese working purists...

Bill Houghton, Sebastopol, CA

...would not use anything but sharpened mouse teeth.

Re: strangest thing you've planed?

#12

Re: Cheese working purists...

Dave Tardiff

Well, if a Lee Valley microplane rasp counts, I've got multiples of those in the kitchen dedicated to use with food. They're at their best with hard cheese like parmesan, but also shine for grating nutmeg for eggnog.

I've also used block planes for fitting gingerbread house parts, bringing the planing of food back to the original intent of the tools....

Re: strangest thing you've planed?

#13

Re: strangest thing you've planed?

Jack Ervin

In the early '60s I had a Stanley 101cast iron block plane that I fitted with a blade made from a flat file which was ground to a 90 degree angle (as in end scraper) to plane the edges of Formica to smooth up and edge brake after routing. Also in the mid '50s I used my Miller Falls block plane to skive leather.

Re: strangest thing you've planed?

#14

You asked for it.

Mark Nowicki

Heel calluses.

I know, gross.

Re: strangest thing you've planed?

#15

Re: You asked for it.

Bruce, a MN Galoot

That’s what a pad sander is for. :D

Re: strangest thing you've planed?

#16

Re: You asked for it.

david weaver

well, if there's a need....makes more sense than buying a bunch of drug store gimmicks.

I'd bet a nicholson super shear would be good for that, too. They're sharp when they're new, but no cost if a plane works without buying anything else.

(I've sanded palm callouses that occur due to golf before, and pared bits off - never thought of using a plane, though).

Re: strangest thing you've planed?

#17

Some advice for young woodworkers...

Mark Nowicki

.... contemplating marriage.

If your girlfriend needs a #5 or higher, don't. :D

Re: strangest thing you've planed?

#18

Re: You asked for it.

Bill Houghton, Sebastopol, CA

Just don't use a power plane.

Re: strangest thing you've planed?

#19

Re: You asked for it.

Jim Matthews

You'll only need it, once.

Re: strangest thing you've planed?

#20

Re: strangest thing you've planed?

bridger berdel

Polyethlene commercial cuting board. Edge relief of brass and alumium sheet. Edge clean up of sawn fiberglass motorcycle fairing (hard on the edge and the sole of the plane). Truing up the top edge of a blue plastic barrel for the dust collector in my shop.