Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Blum, euro-hinge question

Posts

Blum, euro-hinge question

#1

Blum, euro-hinge question

Wiley Horne

Hi all,

Looking for the right Blum hinge, or an installation method that works.

Object: Hang lipped cabinet doors on face-frame cabinets. Lip overlays face frame by approx. 3/8”.

Looking for: Blum blumotion (soft close) hinges that work.

Problem: Can’t find a Blum hinge for lipped doors. I’m willing to rig a solution, like blocking behind the face frame to set the mounting plate back, or suchlike. But before beginning some expensive experiments, thought I would ask the knowledgeable ones what to do.

All suggestions appreciated!

Wiley

beginjing some expensive experiments, thought I would

Re: Blum, euro-hinge question

#2

Re: Blum, euro-hinge question

david weaver

I used the type of hinge you're talking about on my kitchen cabinets, and then before that, amerock hinges in HUGE amounts working at Aristokraft in college (similar style, no soft close for us at the time).

I don't remember seeing anything that was made for doors that are partially recessed, and as you mention, I could suggest a cobble.

But, I would first call Blum and ask them if they have anything for the application.

I'd imagine that long ago, they went away from what I'm used to and toward cabinet mount hinges for frameless cabinets (much cheaper to make), but partial recess and partial overlay doors are probably even less common than face frame - and if they have a solution, it just may not show up.

I had doors of that type on my last cabinet, but the hinge types were simple where the hinges itself attached to the back side of the door lip and part was exposed right on the face frame.

Re: Blum, euro-hinge question

#3

Re: Blum, euro-hinge question

david weaver

I see some hinges designed for what you're talking about, marketed by rockler and other places. They're exorbitantly expensive ($29 a hinge or something) and look complicated, from a brand that may be too new for me to have heard of given my antiquated experience ("Salice").

Since the inset is some fixed amount, and the doors would also have some accommodation for bumpers, I'd be inclined to rabbet an auxiliary piece of wood behind the face frame for a traditional inexpensive compact blum hinge to work with.

The idea of having an extra piece like that may offend some, but I'd trust the compact euro hinge to be around longer than expensive hinges that may or may not sell enough to stay in production.

The entire contraption on the alternative hinges that I see is pretty much the same compact euro style mount in the door, but then pure rube goldberg connecting that to the inside of the cabinet, and may require face frame to case dimensions that would require even more cobbling.

Re: Blum, euro-hinge question

#4

Re: Blum, euro-hinge question

Wiley Horne

Hi David,

I’ll look at the Salice hinge. The only possible solution I can make out using Blum (which I really like) is to block behind the face frame as you mentioned, which mimics a frameless situation, and then use the Blum half-cranked for inset doors, with the frameless mounting plate pulled forward 3/8”. But even there, the lip might bind on opening.

My fallback is a nice Italian hinge where only the pivot shows, but it’s not self-closing.

Thanks for trying!

Wiley

Re: Blum, euro-hinge question

#5

Re: Blum, euro-hinge question

david weaver

Hi, Wiley, I was thinking more along the lines of a rabbeted board, a face behind the face, that would create a situation where the relief that you choose in the hinge is accomodated for. For example, if you get a 3/4" overlay hinge, it would mount with a 3/4" overlay plus a little bit into the inset part of the door. That would give you enough room to prevent binding. You would lose about 3/4" of opening, but the inset board could be rabbeted to the back of the face frame (or all the way to the inside of the case) to make sure it's rigid.

That would be cheap and use the common compact style of hinge rather than the type that mounts to the side of the cabinet.

One obvious benefit of the soft close hinges (I have full solid raised panel doors on my cabinets, and my wife is a rough slammer of doors - I was concerned that she may ultimately lever the face frame loose from the case over time) is that users learn not to slam doors because they don't even have to close them the whole way. I think a part rabbeted to the face frame back from the original frame by about 3/8" plus a little bit would be plenty rigid.

Re: Blum, euro-hinge question

#6

Re: Blum, euro-hinge question

david weaver

I think I see the potential problem you're talking about, with the overlay part of the lip touching the face frame.

Without looking how much room there is between the face frame and the door with my open doors (not currently at home), I don't know how much wiggle room there is. It's some, but it may not be as much as the lip on your doors.