Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Railroad spike

Posts

Railroad spike

#1

Railroad spike

Jeremy Osner

I found a rusty old railroad spike by the tracks today... It looks like it ought to be turned into a tool. Anyone have uses for old railroad spikes? I guess it is probably way too soft to make a useful edge tool?

Re: Railroad spike

#2

Re: Railroad spike

John Veerkamp

can be used as a small wood splitter for fire wood to free a larger stuck wedge.

Re: Railroad spike

#3

Re: Railroad spike

Kevin French

We cut them at around 3", drill and tap them then screw them thorough a horizontal wine barrel stave with 4 or 5 other ones to make coat hooks

Re: Railroad spike

#4

Re: Railroad spike

Philip F Duffy

Some spikes have a pretty good level of carbon, others not so much. If you look on the top those with will have a C marking (as I remember). They hold a great edge and many knife makers use them for custom knives.

Re: Railroad spike

#6

Re: Railroad spike

TomD

If you have a power grinder, or a high speed disc sander that will generate sparks, you can tell how high carbon it is from the form of the sparks. No doubt there is an online video for that. Also, with lower C, you can harden in Super Quench, but you will normally get say hammer levels of hardness.

Re: Railroad spike

#7

Re: Railroad spike

Wiley Horne

Maybe a small anvil. Drive it into something heavy.

Wiley

Re: Railroad spike

#8

P.S.

Wiley Horne

Maybe Ellis could have a Railroad Spike Challenge. Winner gets an 8-lb hammer, reportedly one of the two used by John Henry.

Wiley

Re: Railroad spike

#9

Re: Railroad spike

William Duffield

That's what I use mine for. A warning: Don't do as I did, and try to hold it in your vise while beating on it. It's not good for the vise jaws or the vise mechanism or the vise mount. Like Wiley suggests, drive it into an elm stump and set it somewhere very solid (like a Roubo, directly over a massive leg) while you are using it.

Re: Railroad spike

#10

Re: Railroad spike

TomD

Exactly, perfect for a peening anvil for your scythe.

Re: Railroad spike

#11

Re: Railroad spike

Bruce, a MN Galoot

If you have metalworking skills, a spike knife would be one such project.


Re: Railroad spike

#12

John Henry

Ray Newman

John Henry! Now that is a name I have not heard mentioned in many years.

Re: Railroad spike

#13

Re: Railroad spike

Jeremy Osner

Thanks for the ideas! From the spark test it looks (if I'm understanding the video I watched correctly) like low-carbon steel. I reckon I will make it into an anvil.

Re: Railroad spike

#14

Re: Railroad spike

Rum

I have a couple of the higher carbon ones I've ground and polished the tops then made the bottom a bit sharper so they work "ok' as scythe peening anvils.

Re: Railroad spike

#16

Re: Railroad spike specs, and dragons

TomD

http://www.anvilfire.com/article.php?bodyName=/FAQs/rr-spike.htm

These are some RR spike letter openers I found online:


I never got much past start with forging, since all I really wanted was to heat treat. But I did try a few minor projects, and and anvilfire.com has good instructions for things like dragons. I tried the moves out first with my kids' wooden hammer, and some Plasticine.

Re: Railroad spike

#17

Ellis Walentine

We need a champion for that little project, Wiley

Ellis Walentine

Sounds like a great idea. I'll check with Ellis when I see him again. :)