Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

No 4 Plane question and....

Posts

No 4 Plane question and....

#1

No 4 Plane question and....

Barry Irby

I normally post on the corded tool side and I posted these questions there, but was sent here for further enlightenment.

I have a chance to buy two planes. One is a Stanley/Bailey No 4. In barn find condition. What is this plane for and is it a good one to have for a newbie to hand planes? What does one do with a Smoother?

The other one is a Union that is 14" long with hardly any other markings. The knob is missing. Would this make a good plane for a shooting board? Other uses?

What about the steel in the irons of these two planes?

Tell me what I need to know

Re: No 4 Plane question and....

#2

Jack Guzman from Maine

Re: No 4 Plane question and....

Jack Guzman from Maine

A #4 is a pretty good plane for a starter. However I think the 14" union plane which sounds like a jack plane size would be a far more useful tool. I suggest you get both,tune them up and explore. You will discover what you need them for once you learn how they work. I use a jack plane for preparing seat blanks out of rough pine. The number four is a finishing plane. I don't use mine much in windsor chair building.