Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Pull Saw Stand *LINK*

Posts

Pull Saw Stand *LINK*

#1

Pull Saw Stand *LINK*

Kevin French

My new pull saw stand made from wine heads and a white wine stave


Pull Saw Stand

Re: Pull Saw Stand *LINK*

#2

Re: Pull Saw Stand

Don Orr

Very cool ! Cheers!

Re: Pull Saw Stand *LINK*

#3

The curved stave turns it into

Wiley Horne--So. Calif.

art. Makes you wonder what else can be made from those. Derek’s Stool 2.0?

Thanks for sharing!

Wiley

Re: Pull Saw Stand *LINK*

#5

Re: Pull Saw Stand

Patrick Chase

Nice stand!

It's a pity that the saws all cut the wrong way, though :-)

(FWIW I have several Japanese saws for various uses. I just prefer push saws for purely subjective reasons and because that's what I learned with).

Re: Pull Saw Stand *LINK*

#6

Re: Pull Saw Stand

Kevin French

I like to push things also and have several Western saws. But I also like these pull saws working with the oak.

Tease: The Double Layer Saw Till using staves is my next project.

Re: Pull Saw Stand *LINK*

#8

P. S.

Wiley Horne--So. Calif.

Can we see one of your chairs?

Wiley

Re: Pull Saw Stand *LINK*

#9

Wine barrel furniture and the like

Bill Houghton, Sebastopol, CA

There's quite a bit of it around here - lots of old wine barrels in wine country.

People often make references in their designs to Japanese furniture and temple conventions, something made easy by the curves in the length of the staves.

Re: Pull Saw Stand *LINK*

#10

(Message Deleted by Poster)


Re: Pull Saw Stand *LINK*

#11

Re: P. S. *LINK*

Kevin French

Here is a pic of the chairs. Also the small pieces on the right side of the pic, up and down are ones that I made along with the hoops.

I'm the R&D guy of small things


http://https://lh3.googleusercontent.com/vRIsqyJ8Uf9jXyEwzQkzxw-nUMFdufB6P_JDmzQfhtUS7NJNm2t9VnMfEgvHJKO0sYizaGzAdpGq7iDWiXQ2cGyU4wD_DwgT7x3__3DtxlOJBVPw2NQle1LQMK9KWrgCvrKS--piHX5okVMiTH3gN5FztgD9gSjCJY7eDLL9dTPPxE-Y055nfsZLhyLsRVyocGeDCK_ezGSeseN5s

Re: Pull Saw Stand *LINK*

#12

Re: P. S.

Bruce, a MN Galoot

When you paste the link, please remember to take out the http:\\ that is already there.

Re: Pull Saw Stand *LINK*

#14

Re: Wine barrel furniture and the like

Bill Houghton, Sebastopol, CA

This area's had a small but mighty cooperage operation going for a long time. Our son has a friend whose father was trained as a traditional cooper, and worked as a cooper.

Re: Pull Saw Stand *LINK*

#15

Re: Wine barrel furniture and the like

Kevin French

Barrel Staves are a lot of fun to work with. There isn't a square part on then except the ends are parallel . Staves from the same barrel may not have the same curve, all that makes for a big learning curve.

The first time I had to cut the ends off a stave I felt like a 10 year old again in 4H woodworking class, trying to figure out how to cut them square.